CubeSatSim/hardware/solar/v0.4s

Here is information about the Beta version of the CubeSatSim Solar PCB

Changes since the v0.3 board:

• Moved U4 so that it isn't covered up by U6
• Moved bridging labels so they can be better seen
• Flipped U2 and U12 so they are the same direction as all the other ICs
• J4 test pins are now 6 pins and used on the top

The files here are for a single board, the CubeSatSim Pico which replaces the STEM Payload Board and the Raspberry Pi Zero.

cubesatsim-solar-0.4s_gerbers.zip -- All gerber files used to fabricate PCBs along with .TXT drill file

cubesatsim-solar-0.4s_schematic.pdf -- Schematic

cubesatsim-solar-0.4s_pcb.png -- View of board

cubesatsim-solar-0.4s_pour.png -- View of board with fill

cubesatsim-solaro-0.4s_top.png -- Top view of PCB generated by gerbers

cubesatsim-solar-0.4s_bottom.png -- Bottom view of PCB generated by gerbers

cubesatsim-solar-0.4s_tNames.pdf -- Top outline of components

cubesatsim-solar-0.4s_bNames.pdf -- Bottom outline of components

cubesatsim-solar-0.4s.mnt -- top SMD component placement data

cubesatsim-solar-0.4s.mnb -- bottom SMD component placement data

cubesatsim-solar-0.4s_bom.csv.txt -- Bill of Materials in CSV format

I use PCBWay to fabricate PCBs https://pcbway.com

Here is a very draft bill of materials https://octopart.com/bom-tool/g1Fkrhew

Draft wiki instructions: https://github.com/alanbjohnston/CubeSatSim/wiki/Pico-and-Solar-SMD