You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
57 lines
1.8 KiB
57 lines
1.8 KiB
/*
|
|
Blink
|
|
Turns on an LED on for one second, then off for one second, repeatedly.
|
|
Most Arduinos have an on-board LED you can control. On the Uno and
|
|
Leonardo, it is attached to digital pin 13. If you're unsure what
|
|
pin the on-board LED is connected to on your Arduino model, check
|
|
the documentation at http://arduino.cc
|
|
This example code is in the public domain.
|
|
modified 8 May 2014
|
|
by Scott Fitzgerald
|
|
|
|
Modified by Roger Clark. www.rogerclark.net for Maple mini 25th April 2015 , where the LED is on PC13
|
|
|
|
Added CubeSatSim Payload tests by Alan Johnston, KU2Y
|
|
|
|
*/
|
|
|
|
int sensorValue = 0;
|
|
int D9 = 9;
|
|
int D8 = 8;
|
|
// Calibration data for diode temperature sensor
|
|
float T1 = 25; // Temperature data point 1
|
|
float R1 = 373; // Reading data point 1
|
|
float T2 = 17; // Temperature data point 2
|
|
float R2 = 405; // Reading data point 2
|
|
|
|
// the setup function runs once when you press reset or power the board
|
|
void setup() {
|
|
// initialize digital pin PB1 as an output.
|
|
pinMode(D9, OUTPUT);
|
|
pinMode(D8, OUTPUT);
|
|
|
|
Serial.begin(9600);
|
|
}
|
|
|
|
// the loop function runs over and over again forever
|
|
void loop() {
|
|
digitalWrite(D9, HIGH); // turn the LED on (HIGH is the voltage level)
|
|
digitalWrite(D8, LOW); // turn the LED on (HIGH is the voltage level)
|
|
delay(1000); // wait for a second
|
|
digitalWrite(D9, LOW); // turn the LED off by making the voltage LOW
|
|
digitalWrite(D8, HIGH); // turn the LED on (HIGH is the voltage level)
|
|
delay(1000); // wait for a second
|
|
|
|
sensorValue = analogRead(A0);
|
|
// Serial.println(sensorValue);
|
|
sensorValue = analogRead(A1);
|
|
|
|
float temp = T1 + (sensorValue - R1) *(T2 - T1)/(R2 - R1);
|
|
Serial.print("Temperature: ");
|
|
Serial.print(temp);
|
|
Serial.println(" C");
|
|
|
|
sensorValue = analogRead(A2);
|
|
// Serial.println(sensorValue);
|
|
}
|