Here is information about the CubeSatSim Pico v0.1 Beta hardware

The files here are for a single board, the CubeSatSim Pico which replaces the STEM Payload Board and the Raspberry Pi Zero.

* cubesatsim-pico-0.1_gerbers.zip  --    All gerber files used to fabricate PCBs

* cubesatsim-pico-0.1_schematic.pdf --   Schematic

* cubesatsim-pico-0.1_pcb.png     --   View of board

* cubesatsim-pico-0.1_board_fill.png --  View of board with fill

* cubesatsim-main-pico-0.1_topPCB.png    --   Top view of PCB generated by gerbers

* cubesatsim-main-pico-0.1_bottomPCB.png  --  Bottom view of PCB generated by gerbers

* cubesatsim-main-pico-0.1_tNames.pdf     --  Top outline of components

* cubesatsim-main-pico-0.1_bNames.pdf    --   Bottom outline of components

* cubesatsim-main-pico-0.1.mnt           --   top SMD component placement data

* cubesatsim-main-pico-0.1.mnb           --   bottom SMD component placement data

* cubesatsim-main-pico-0.1_bom.csv.txt   --   Bill of Materials in CSV format


I use PCBWay to fabricate PCBs https://pcbway.com

Here is a very draft bill of materials https://docs.google.com/spreadsheets/d/1koIF0RfdkwiuoxBHSmCySKWIUqx1aFbtxMq1iwy3mb4/edit?usp=sharing

No wiki instructions yet