From f58c964927d5dda6418ee1e81aeb70f308f96077 Mon Sep 17 00:00:00 2001
From: Alan Johnston <alan.b.johnston@gmail.com>
Date: Sat, 22 Jun 2024 08:05:19 -0400
Subject: [PATCH] Delete
 stempayload/ayload_BME280_MPU6050_AIO/payload_extension.cpp

---
 .../payload_extension.cpp                     | 71 -------------------
 1 file changed, 71 deletions(-)
 delete mode 100644 stempayload/ayload_BME280_MPU6050_AIO/payload_extension.cpp

diff --git a/stempayload/ayload_BME280_MPU6050_AIO/payload_extension.cpp b/stempayload/ayload_BME280_MPU6050_AIO/payload_extension.cpp
deleted file mode 100644
index b88dd680..00000000
--- a/stempayload/ayload_BME280_MPU6050_AIO/payload_extension.cpp
+++ /dev/null
@@ -1,71 +0,0 @@
-// Use this template for adding additional sensors
-
-// put your library includes here
-#include "Adafruit_SI1145.h"
-#include <Adafruit_LIS3MDL.h>
-
-// put your globals here
-Adafruit_SI1145 uv = Adafruit_SI1145();
-Adafruit_LIS3MDL lis3mdl;
-
-int uvPresent;
-int magPresent;
-
-float magRaw = 0;
-float magRawAbs = 0;
-
-// put your setup code here
-void payload_setup() {
-
-  Serial.println("Starting Si1145 sensor!");
-
-  if (! uv.begin()) {
-    Serial.println("Si1145 sensor fault");
-    uvPresent = 0;
-  } else {
-    uvPresent = 1;
-  }
-
-  Serial.println("Starting LIS3MDL sensor!");
-
-  if (! lis3mdl.begin_I2C()) {
-    Serial.println("LIS3MDL sensor fault");
-    magPresent = 0;
-  } else {
-    magPresent = 1;
-  }
-}
-
-// put your loop code here
-// Very Important: only use print, not println!!
-void payload_loop() {
-
-  if (uvPresent) {
-    Serial1.print(" SI ");  // chose a 2-3 letter hint for your sensor
-    Serial1.print(uv.readVisible());  // Serial1 sends the sensor data to the Pi Zero for transmission
-    Serial1.print(" ");
-    Serial1.print(uv.readIR());
-  
-    Serial.print(" SI ");
-    Serial.print(uv.readVisible());   // Serial sends the sensor data to the Serial Monitor for debugging
-    Serial.print(" ");
-    Serial.print(uv.readIR());
-  } else {
-    Serial1.print(" SI 0.0 0.0");
-    Serial.print(" SI 0.0 0.0");        
-  }
-  if (magPresent) {
-    lis3mdl.read();
-    magRaw = (((lis3mdl.x + lis3mdl.y + lis3mdl.z) / 3));
-    magRawAbs = abs(magRaw);
-    
-    Serial1.print(" LI ");
-    Serial1.print(magRawAbs);
-    
-    Serial1.print(" LI ");
-    Serial.print(magRawAbs);
-  } else {
-    Serial1.print(" LI 0.0");
-    Serial.print(" LI 0.0");
-  }
-}