From e15c14cb4542b168eb1db31c73dc9aaa87448053 Mon Sep 17 00:00:00 2001 From: alanbjohnston Date: Thu, 13 Aug 2020 10:11:23 -0400 Subject: [PATCH] Update README.md --- arduino/README.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arduino/README.md b/arduino/README.md index 6db49443..cb3e4b9e 100644 --- a/arduino/README.md +++ b/arduino/README.md @@ -8,9 +8,9 @@ i2c_scanner.ino A handy utility for scanning the I2C bus that displays the resu blink_stm32.ino and blink_pro_micro.ino The usual Arduino "Hello World" application that blinks the LED. -bme280test.ino Displays the results of reading the BME280 sensor: Temperature, Pressure, Altitude, and Humidity and displays on Serial Monitor 9600 baud. Requires the following libraries: Wire, Adadruit_Sensor, Adafruit_BME280 +bme280test.ino Displays the results of reading the BME280 sensor: Temperature, Pressure, Altitude, and Humidity and displays on Serial Monitor 9600 baud. Requires the following libraries: Adadruit Unified Sensor (specify version 1.0.3), Adafruit_BME280 (specify version 1.1.0) -GetAllData.ino Displays the results of reading the MPU6050 sensor: Temperature, X, Y, and Z Axes: Acceleration, Gyor (Rotation Rate), and Angle. Requires the following libraries: Wire and MPU6050_tockn. +GetAllData.ino Displays the results of reading the MPU6050 sensor: Temperature, X, Y, and Z Axes: Acceleration, Gyor (Rotation Rate), and Angle. Requires the following libraries: MPU6050_tockn. The STM32 can be programmed using the Arduino IDE with the Generic STM32F103C series board and STM32duino bootloader, Maple Mini port.