diff --git a/install b/install
index 51509ee5..69380167 100755
--- a/install
+++ b/install
@@ -1,6 +1,6 @@
 #!/bin/bash
 
-echo -e "\ninstallation script for CubeSatSim v2.0\n"
+echo -e "\ninstallation script for CubeSatSim v2.1\n"
 
 FILE=/home/pi/CubeSatSim/sim.cfg
 if [ -f "$FILE" ]; then
@@ -161,11 +161,18 @@ echo "bbs_callsign=$1" >> pacsat.config
 echo "broadcast_callsign=$1-11" >> pacsat.config
 echo "digi_callsign=$1-1" >> pacsat.config
 echo "max_frames_in_tx_buffer=5" >> pacsat.config
-echo "pb_open=1" >> pacsat.config
-echo "uplink_open=1" >> pacsat.config
+
+echo "pb_open=1" > pacsat.state
+echo "uplink_open=1" >> pacsat.state
 
 cd
 
+sudo sed -i 's/#hdmi_group=1/hdmi_group=2/g' /boot/config.txt
+sudo sed -i 's/#hdmi_mode=1/hdmi_mode=16/g' /boot/config.txt
+sudo sed -i 's/#hdmi_force_hotplug=1/hdmi_force_hotplug=1/g' /boot/config.txt
+
+sudo raspi-config nonint do_vnc 0
+
 cd /tmp
 
 wget https://www.g0kla.com/pacsat/downloads/test/PacSatGround_0.46m_linux.tar.gz
@@ -206,11 +213,10 @@ sudo raspi-config nonint do_legacy 0
 
 ##  sudo sed -i 's/console=serial0,115200 //g' /boot/cmdline.txt
   
-
   sudo sed -i 's/console=serial0,115200 //g' /boot/cmdline.txt
 
-  sudo sed -i 's/console=tty1 r/console=tty1 maxcpus=1 r/g' /boot/cmdline.txt # single core if Pi Zero 2
-
+  #sudo sed -i 's/console=tty1 r/console=tty1 maxcpus=1 r/g' /boot/cmdline.txt # single core if Pi Zero 2
+  
   sudo sed -i 's/#dtparam=i2c_arm=on/dtparam=i2c_arm=on/g' /boot/config.txt
   
   if [[ $(grep 'dtoverlay=i2c-gpio,bus=3,i2c_gpio_delay_us=1,i2c_gpio_sda=23,i2c_gpio_scl=24' /boot/config.txt) ]]; then