From d1dd5c32116ae99261c87ddb2e0526902df6b768 Mon Sep 17 00:00:00 2001
From: Alan Johnston <alan.b.johnston@gmail.com>
Date: Sat, 22 Jun 2024 09:36:31 -0400
Subject: [PATCH] Create edit_this_config_and_rename.h

config file needing your info
---
 .../edit_this_config_and_rename.h             | 74 +++++++++++++++++++
 1 file changed, 74 insertions(+)
 create mode 100644 stempayload/Payload_BME280_MPU6050_AIO/edit_this_config_and_rename.h

diff --git a/stempayload/Payload_BME280_MPU6050_AIO/edit_this_config_and_rename.h b/stempayload/Payload_BME280_MPU6050_AIO/edit_this_config_and_rename.h
new file mode 100644
index 00000000..b6c47fa3
--- /dev/null
+++ b/stempayload/Payload_BME280_MPU6050_AIO/edit_this_config_and_rename.h
@@ -0,0 +1,74 @@
+// Edit this config file with your IO Username, Key, WiFi SSID and Password, then save as config.h
+
+/************************ Adafruit IO Config *******************************/
+
+// visit io.adafruit.com if you need to create an account,
+// or if you need your Adafruit IO key.
+#define IO_USERNAME "your_username"
+#define IO_KEY "your_key"
+
+/******************************* WIFI **************************************/
+
+// the AdafruitIO_WiFi client will work with the following boards:
+//   - HUZZAH ESP8266 Breakout -> https://www.adafruit.com/products/2471
+//   - Feather HUZZAH ESP8266 -> https://www.adafruit.com/products/2821
+//   - Feather HUZZAH ESP32 -> https://www.adafruit.com/product/3405
+//   - Feather M0 WiFi -> https://www.adafruit.com/products/3010
+//   - Feather WICED -> https://www.adafruit.com/products/3056
+//   - Adafruit PyPortal -> https://www.adafruit.com/product/4116
+//   - Adafruit Metro M4 Express AirLift Lite ->
+//   https://www.adafruit.com/product/4000
+//   - Adafruit AirLift Breakout -> https://www.adafruit.com/product/4201
+//   - Adafruit AirLift Shield -> https://www.adafruit.com/product/4285
+//   - Adafruit AirLift FeatherWing -> https://www.adafruit.com/product/4264
+
+#define WIFI_SSID "your_ssid"
+#define WIFI_PASS "your_pass"
+
+// uncomment the following line if you are using airlift
+// #define USE_AIRLIFT
+
+// uncomment the following line if you are using winc1500
+// #define USE_WINC1500
+
+// uncomment the following line if you are using mrk1010 or nano 33 iot
+//#define ARDUINO_SAMD_MKR1010
+
+// comment out the following lines if you are using fona or ethernet
+#include "AdafruitIO_WiFi.h"
+
+#if defined(USE_AIRLIFT) || defined(ADAFRUIT_METRO_M4_AIRLIFT_LITE) ||         \
+    defined(ADAFRUIT_PYPORTAL)
+// Configure the pins used for the ESP32 connection
+#if !defined(SPIWIFI_SS) // if the wifi definition isnt in the board variant
+// Don't change the names of these #define's! they match the variant ones
+#define SPIWIFI SPI
+#define SPIWIFI_SS 10 // Chip select pin
+#define NINA_ACK 9    // a.k.a BUSY or READY pin
+#define NINA_RESETN 6 // Reset pin
+#define NINA_GPIO0 -1 // Not connected
+#endif
+AdafruitIO_WiFi io(IO_USERNAME, IO_KEY, WIFI_SSID, WIFI_PASS, SPIWIFI_SS,
+                   NINA_ACK, NINA_RESETN, NINA_GPIO0, &SPIWIFI);
+#else
+AdafruitIO_WiFi io(IO_USERNAME, IO_KEY, WIFI_SSID, WIFI_PASS);
+#endif
+/******************************* FONA **************************************/
+
+// the AdafruitIO_FONA client will work with the following boards:
+//   - Feather 32u4 FONA -> https://www.adafruit.com/product/3027
+
+// uncomment the following two lines for 32u4 FONA,
+// and comment out the AdafruitIO_WiFi client in the WIFI section
+// #include "AdafruitIO_FONA.h"
+// AdafruitIO_FONA io(IO_USERNAME, IO_KEY);
+
+/**************************** ETHERNET ************************************/
+
+// the AdafruitIO_Ethernet client will work with the following boards:
+//   - Ethernet FeatherWing -> https://www.adafruit.com/products/3201
+
+// uncomment the following two lines for ethernet,
+// and comment out the AdafruitIO_WiFi client in the WIFI section
+// #include "AdafruitIO_Ethernet.h"
+// AdafruitIO_Ethernet io(IO_USERNAME, IO_KEY);