From d11c59540418dbd3396081a4ceb2730220f806a3 Mon Sep 17 00:00:00 2001
From: CMehner-space <69016840+CMehner-space@users.noreply.github.com>
Date: Mon, 17 Aug 2020 08:52:03 -0400
Subject: [PATCH] Update bme280test.ino

---
 arduino/bme280test.ino | 94 ++++++++++--------------------------------
 1 file changed, 21 insertions(+), 73 deletions(-)

diff --git a/arduino/bme280test.ino b/arduino/bme280test.ino
index 9fb8c432..d21be5a1 100644
--- a/arduino/bme280test.ino
+++ b/arduino/bme280test.ino
@@ -1,89 +1,37 @@
-/***************************************************************************
-  This is a library for the BME280 humidity, temperature & pressure sensor
-
-  Designed specifically to work with the Adafruit BME280 Breakout
-  ----> http://www.adafruit.com/products/2650
-
-  These sensors use I2C or SPI to communicate, 2 or 4 pins are required
-  to interface. The device's I2C address is either 0x76 or 0x77.
-
-  Adafruit invests time and resources providing this open source code,
-  please support Adafruit andopen-source hardware by purchasing products
-  from Adafruit!
-
-  Written by Limor Fried & Kevin Townsend for Adafruit Industries.
-  BSD license, all text above must be included in any redistribution
-  See the LICENSE file for details.
- ***************************************************************************/
-
 #include <Wire.h>
-#include <SPI.h>
 #include <Adafruit_Sensor.h>
 #include <Adafruit_BME280.h>
 
-#define BME_SCK 13
-#define BME_MISO 12
-#define BME_MOSI 11
-#define BME_CS 10
-
 #define SEALEVELPRESSURE_HPA (1013.25)
 
-Adafruit_BME280 bme; // I2C
-//Adafruit_BME280 bme(BME_CS); // hardware SPI
-//Adafruit_BME280 bme(BME_CS, BME_MOSI, BME_MISO, BME_SCK); // software SPI
-
-unsigned long delayTime;
+Adafruit_BME280 bme;
 
 void setup() {
-    Serial.begin(9600);
-    while(!Serial);    // time to get serial running
-    Serial.println(F("BME280 test"));
+  Serial.begin(9600);
 
-    unsigned status;
-    
-    // default settings
-    // (you can also pass in a Wire library object like &Wire2)
-    status = bme.begin();  
-    if (!status) {
-        Serial.println("Could not find a valid BME280 sensor, check wiring, address, sensor ID!");
-        Serial.print("SensorID was: 0x"); Serial.println(bme.sensorID(),16);
-        Serial.print("        ID of 0xFF probably means a bad address, a BMP 180 or BMP 085\n");
-        Serial.print("   ID of 0x56-0x58 represents a BMP 280,\n");
-        Serial.print("        ID of 0x60 represents a BME 280.\n");
-        Serial.print("        ID of 0x61 represents a BME 680.\n");
-        while (1);
-    }
-    
-    Serial.println("-- Default Test --");
-    delayTime = 1000;
-
-    Serial.println();
-}
-
-
-void loop() { 
-    printValues();
-    delay(delayTime);
+  if (!bme.begin(0x76)) {
+    Serial.println("Could not find a valid BME280 sensor, check wiring!");
+    while (1);
+  }
 }
 
+void loop() {
+  Serial.print("Temperature = ");
+  Serial.print(bme.readTemperature());
+  Serial.println("*C");
 
-void printValues() {
-    Serial.print("Temperature = ");
-    Serial.print(bme.readTemperature());
-    Serial.println(" *C");
-
-    Serial.print("Pressure = ");
-
-    Serial.print(bme.readPressure() / 100.0F);
-    Serial.println(" hPa");
+  Serial.print("Pressure = ");
+  Serial.print(bme.readPressure() / 100.0F);
+  Serial.println("hPa");
 
-    Serial.print("Approx. Altitude = ");
-    Serial.print(bme.readAltitude(SEALEVELPRESSURE_HPA));
-    Serial.println(" m");
+  Serial.print("Approx. Altitude = ");
+  Serial.print(bme.readAltitude(SEALEVELPRESSURE_HPA));
+  Serial.println("m");
 
-    Serial.print("Humidity = ");
-    Serial.print(bme.readHumidity());
-    Serial.println(" %");
+  Serial.print("Humidity = ");
+  Serial.print(bme.readHumidity());
+  Serial.println("%");
 
-    Serial.println();
+  Serial.println();
+  delay(1000);
 }