Update install use config -V to set CPUs to 2

install

@@ -84,10 +84,10 @@ if [[ $(grep 'bullseye' /etc/os-release) ]]; then
 	  
 	  sudo sed -i 's/console=serial0,115200 //g' /boot/cmdline.txt
 	
-	  sudo sed -i 's/console=tty1 r/console=tty1 maxcpus=2 r/g' /boot/cmdline.txt # single core if Pi Zero 2
-#	  sudo sed -i 's/console=tty1 maxcpus=1 r/console=tty1 r/g' /boot/cmdline.txt 
+#	  sudo sed -i 's/console=tty1 r/console=tty1 maxcpus=2 r/g' /boot/cmdline.txt # single core if Pi Zero 2
+##	  sudo sed -i 's/console=tty1 maxcpus=1 r/console=tty1 r/g' /boot/cmdline.txt 
 	
-	  sudo sed -i 's/maxcpus=1/maxcpus=2/g' /boot/cmdline.txt # single core if Pi Zero 2
+#	  sudo sed -i 's/maxcpus=1/maxcpus=2/g' /boot/cmdline.txt # single core if Pi Zero 2
 	
 	  sudo sed -i 's/#dtparam=i2c_arm=on/dtparam=i2c_arm=on/g' /boot/config.txt
 	  
@@ -225,10 +225,10 @@ if [[ $(grep 'bookworm' /etc/os-release) ]]; then
 	
 	  sudo sed -i 's/console=serial0,115200 //g' /boot/firmware/cmdline.txt
 	
-	  sudo sed -i 's/console=tty1 r/console=tty1 maxcpus=2 r/g' /boot/firmware/cmdline.txt # single core if Pi Zero 2
-#	  sudo sed -i 's/console=tty1 maxcpus=1 r/console=tty1 r/g' /boot/firmware/cmdline.txt 
+#	  sudo sed -i 's/console=tty1 r/console=tty1 maxcpus=2 r/g' /boot/firmware/cmdline.txt # single core if Pi Zero 2
+##	  sudo sed -i 's/console=tty1 maxcpus=1 r/console=tty1 r/g' /boot/firmware/cmdline.txt 
 	
-	  sudo sed -i 's/maxcpus=1/maxcpus=2/g' /boot/firmware/cmdline.txt # single core if Pi Zero 2
+#	  sudo sed -i 's/maxcpus=1/maxcpus=2/g' /boot/firmware/cmdline.txt # single core if Pi Zero 2
 	
 	  sudo sed -i 's/#dtparam=i2c_arm=on/dtparam=i2c_arm=on/g' /boot/firmware/config.txt
 
@@ -352,6 +352,8 @@ elif [[ $(grep 'trixie' /etc/os-release) ]]; then
 	fi
 fi
 
+/home/pi/CubeSatSim/config -V 2  # set maxcpus to 2
+
 FILE=/etc/modprobe.d/alsa-base.conf
 if [ -f "$FILE" ]; then
 	echo "$FILE exists."