added gpsd info

README.md

@@ -1,5 +1,27 @@
 # CubeSatSim
 
+Following steps from https://gpsd.gitlab.io/gpsd/installation.html
+
+gpsd steps:
+
+1. plug it in and type:
+
+sudo stty -F /dev/ttyUSB0 ispeed 4800 && cat </dev/ttyUSB0
+
+2. install gpsd software:
+
+sudo apt-get -y install gpsd gpsd-clients python-gps
+
+3. see if running:
+
+ps aux | grep gpsd
+
+4. Set to auto start:
+
+sudo dpkg-reconfigure -plow gpsd
+
+
+
 The CubeSat Simulator https://github.com/alanbjohnston/CubeSatSim/wiki is a low cost satellite emulator that runs on solar panels and batteries, transmits UHF radio telemetry, has a 3D printed frame, and can be extended by additional sensors and modules.  This project is sponsored by the not-for-profit [Radio Amateur Satellite Corporation, AMSAT®](https://amsat.org).
 
 There are several hardware versions and software branches to go with them - see below for information.