From 79566b913cb9ddf219e6e68dfe7677a77483ff6f Mon Sep 17 00:00:00 2001
From: alanbjohnston <alan.b.johnston@gmail.com>
Date: Sat, 28 Aug 2021 11:12:34 -0400
Subject: [PATCH] don't start CubicSDR if testing, also play wav to speaker

---
 groundstation/cubicsdr-decode.sh | 52 ++++++++++++++++++++++++++------
 1 file changed, 43 insertions(+), 9 deletions(-)

diff --git a/groundstation/cubicsdr-decode.sh b/groundstation/cubicsdr-decode.sh
index 6364b1c3..ce298350 100755
--- a/groundstation/cubicsdr-decode.sh
+++ b/groundstation/cubicsdr-decode.sh
@@ -59,19 +59,18 @@ echo
 read -r choice
 
 
-echo
-
-echo "CubicSDR will load in about 10 sceonds."
+if [ "$choice" = "1" ]; then
+  echo
 
-nohup CubicSDR </dev/null >/dev/null 2>&1 & 
+  echo "CubicSDR will load in about 10 sceonds."
 
-echo
+  nohup CubicSDR </dev/null >/dev/null 2>&1 & 
 
-echo "When CubicSDR opens, select Generic RTL2832 device then click Start to begin."
+  echo
 
-echo
+  echo "When CubicSDR opens, select Generic RTL2832 device then click Start to begin."
 
-if [ "$choice" = "1" ]; then
+  echo
 
   echo "Then select File/Session/Open Session then load /home/pi/CubeSatSim/groundstation/cubicsdr/cubicsdr-aprs-direwolf.xml then Open."
   echo "Note that you won't hear anything as the audio is routed to Direwolf for decoding.  To hear the signal, change the Audio Out setting."
@@ -85,6 +84,17 @@ if [ "$choice" = "1" ]; then
   direwolf -c direwolf.conf -r 48000 -t 0
 
 elif [ "$choice" = "2" ]; then
+  echo
+
+  echo "CubicSDR will load in about 10 sceonds."
+
+  nohup CubicSDR </dev/null >/dev/null 2>&1 & 
+
+  echo
+
+  echo "When CubicSDR opens, select Generic RTL2832 device then click Start to begin."
+
+  echo
 
   echo "Then select File/Session/Open Session then load cubicsdr-iss-direwolf.xml then Open."
   echo "Note that you won't get packets unless the ISS is passing over and the radio is in APRS digipeater mode."
@@ -97,6 +107,17 @@ elif [ "$choice" = "2" ]; then
   direwolf -c direwolf.conf -r 48000 -t 0
 
 elif [ "$choice" = "3" ]; then
+  echo
+
+  echo "CubicSDR will load in about 10 sceonds."
+
+  nohup CubicSDR </dev/null >/dev/null 2>&1 & 
+
+  echo
+
+  echo "When CubicSDR opens, select Generic RTL2832 device then click Start to begin."
+
+  echo
 
   echo "Then select File/Session/Open Session then load cubicsdr-aprs-direwolf.xml then Open."
   echo "Then tune the CubicSDR frequency to the one you want to decode."
@@ -110,6 +131,17 @@ elif [ "$choice" = "3" ]; then
   direwolf -c direwolf.conf -r 48000 -t 0
 
 elif [ "$choice" = "4" ]; then
+  echo
+
+  echo "CubicSDR will load in about 10 sceonds."
+
+  nohup CubicSDR </dev/null >/dev/null 2>&1 & 
+
+  echo
+
+  echo "When CubicSDR opens, select Generic RTL2832 device then click Start to begin."
+
+  echo
 
   echo "Then select File/Session/Open Session then load cubicsdr-serenity-direwolf.xml then Open."
   echo "Note that you won't get packets unless the Serenity CubeSat is passing over and is beaconing."
@@ -124,7 +156,7 @@ elif [ "$choice" = "4" ]; then
 
 elif [ "$choice" = "5" ]; then
 
-  echo "A recorded WAV file will play and you should see packets decoded"
+  echo "A recorded WAV file will play and you should see about 4 packets decoded"
 
   echo 
 
@@ -132,6 +164,8 @@ elif [ "$choice" = "5" ]; then
 
 #  read input
 
+  aplay -D hw:0,0 ~/Recordings/437.098_2021-08-28_10-41-34.wav &
+
   aplay -D hw:3,0,0 ~/Recordings/437.098_2021-08-28_10-41-34.wav &