Update pushbutton.py nmcli one line

pushbutton.py

@@ -158,23 +158,25 @@ if not GPIO.input(push_button): # if pushbutton is held down during boot
 		GPIO.output(powerPin, 0)
 		print("sudo nmcli device wifi hotspot con-name HotSpot ifname wlan0 ssid CubeSat password amsatao7")	
 ##		os.system("sudo nmcli device wifi hotspot con-name HotSpot ifname wlan0 ssid CubeSat password amsatao7")
+		result = subprocess.run(['nmcli', 'device', 'wifi', 'hotspot', 'con-name', 'MyHotspot', 'ifname', 'wlan0', 'ssid', 'CubeSat', 'password', 'amsatao7'], capture_output=True, text=True)
+		print(result, flush=True) #.stdout)	
 #		os.system("sudo nmcli c add type wifi ifname wlan0 con-name Hotspot-Manual ssid MyHotspot")
 #		os.system("sudo nmcli connection modify Hotspot-Manual 802-11-wireless.mode ap 802-11-wireless.band bg")
 	#	# os.system("sudo nmcli connection modify Hotspot-Manual wifi-sec.key-mgmt wpa-psk wifi-sec.psk 'YourPassword123' ipv4.method shared")
 #		os.system("sudo nmcli connection down uuid 335c2e13-cab4-40bf-a297-7ff2535ec214") # preconfigured")
 #		os.system("sudo nmcli device disconnect wlan0")
 #		os.system("sudo nmcli connection up uuid d437746a-411f-4f02-95ea-7b2f7665d59a") # Hotspot-Manual")
-		result = subprocess.run(['nmcli', 'connection', 'modify', 'Hotspot-Manual', 'connection.interface-name', 'wlan0'], capture_output=True, text=True)
-		print(result, flush=True) #.stdout)	
+##		result = subprocess.run(['nmcli', 'connection', 'modify', 'Hotspot-Manual', 'connection.interface-name', 'wlan0'], capture_output=True, text=True)
+##		print(result, flush=True) #.stdout)	
 #		result = subprocess.run(['nmcli', 'connection', 'down', 'preconfigured'], capture_output=True, text=True)
 #		print(result, flush=True) #.stdout)
 #		os.system("sudo nmcli connection up Hotspot-Manual")
-		result = subprocess.run(['nmcli', 'radio', 'wifi', 'on'], capture_output=True, text=True)
-		print(result, flush=True)	
-		result = subprocess.run(['nmcli', 'connection', 'up', 'Hotspot-Manual'], capture_output=True, text=True)
-		print(result, flush=True) #.stdout)
+##		result = subprocess.run(['nmcli', 'radio', 'wifi', 'on'], capture_output=True, text=True)
+##		print(result, flush=True)	
+##		result = subprocess.run(['nmcli', 'connection', 'up', 'Hotspot-Manual'], capture_output=True, text=True)
+##		print(result, flush=True) #.stdout)
 #		if (result.returncode != 0):
-		print(result.returncode)
+#		print(result.returncode)
 		result = subprocess.run(['nmcli', 'connection', 'show'], capture_output=True, text=True)
 		print(result, flush=True)			
 		sleep(2)