Merge pull request #337 from alanbjohnston/beta-ft2

c2c full status in FoxTelem, fix serial bug

config

@@ -350,7 +350,7 @@ if [ "$1" = "" ]; then
 
 elif [ "$1" = "-i" ]; then
 
-	reboot=1
+	restart=1
 
 elif [ "$1" = "-a" ]; then
 
@@ -807,8 +807,9 @@ elif [ "$1" = "-d" ]; then
 #			reboot=1
 			sudo systemctl restart command
 			if [[ $(arecord -l | grep card) ]]; then
-				echo "restarting cubesatsim software"
-				sudo systemctl restart cubesatsim
+				restart=1
+###				echo "restarting cubesatsim software"
+###				sudo systemctl restart cubesatsim
 			fi
 ##			sudo reboot now	
 		fi

main.c

@@ -25,59 +25,6 @@
 
 int main(int argc, char * argv[]) {
 	
-  FILE * command_file = fopen("/home/pi/CubeSatSim/command_control", "r");
-  if (command_file == NULL) {
-	    fprintf(stderr,"Command and control is OFF\n");
-	    c2cStatus = 0;
-  } else {
-	    command_file = fopen("/home/pi/CubeSatSim/command_control_direwolf", "r");
-	    if (command_file == NULL)  {
-		    fprintf(stderr,"Command and control Carrier (squelch) is ON\n");
-		    c2cStatus = 1;
-	    } else
-		    fprintf(stderr,"Command and control DTMF or APRS is ON\n");
-		    c2cStatus = 2;
-  }	
-  char resbuffer[1000];
-//  const char testStr[] = "cat /proc/cpuinfo | grep 'Revision' | awk '{print $3}' | sed 's/^1000//' | grep '9000'";
-  const char testStr[] = "cat /proc/cpuinfo | grep 'Revision' | awk '{print $3}' | sed 's/^1000//'";
-  FILE *file_test = sopen(testStr);  // see if Pi Zero 2  
-  fgets(resbuffer, 1000, file_test);
-  fprintf(stderr, "Pi test result: %s\n", resbuffer);
-  fclose(file_test);	
-
-  FILE * uptime_file = fopen("/proc/uptime", "r");
-  fscanf(uptime_file, "%f", & uptime_sec);
-  printf("Uptime sec: %f \n", uptime_sec);	  
-  fclose(uptime_file);
-  
-  fprintf(stderr, " %x ", resbuffer[0]);
-  fprintf(stderr, " %x \n", resbuffer[1]);	
-  if ((resbuffer[0] != '9') || (resbuffer[1] != '0') || (resbuffer[2] != '0') || (resbuffer[3] != '0')) 
-  {
-    // voltageThreshold = 3.7;
-    fprintf(stderr, "Pi Zero not detected (could be Pi Zero 2)\n");
-    pi_zero_2_offset = 500;
-    if (uptime_sec < 30.0) {
-	FILE * rpitx_stop = popen("sudo systemctl start rpitx", "r");
-  	pclose(rpitx_stop);   
-        fprintf(stderr, "Sleep 5 sec");    
-	sleep(5);  // try sleep at start to help boot
-    }
-  }
-  else {
-    fprintf(stderr,"Pi Zero detected\n");
-    if ((c2cStatus == 0) || (c2cStatus == 1))  {
-      pi_zero_2_offset = 500;
-    }
-    if (uptime_sec < 30.0) {
-      FILE * rpitx_stop = popen("sudo systemctl start rpitx", "r");
-      pclose(rpitx_stop);
-      fprintf(stderr,"Sleep 10 sec");    
-      sleep(10);
-    }
-  }
-	
   printf("\n\nCubeSatSim v1.3.2 starting...\n\n");
 
   wiringPiSetup();	
@@ -131,6 +78,62 @@ int main(int argc, char * argv[]) {
   if (strcmp(hab_yes, "yes") == 0) {
 	  hab_mode = TRUE;
 	  fprintf(stderr, "HAB mode is ON\n");
+  }	
+	
+  FILE * command_file = fopen("/home/pi/CubeSatSim/command_control", "r");
+  if (command_file == NULL) {	  	
+	    fprintf(stderr,"Command and control is OFF\n");
+	    c2cStatus = 0;
+  } else {
+	    command_file = fopen("/home/pi/CubeSatSim/command_control_direwolf", "r");
+	    if (command_file == NULL)  {
+		    fprintf(stderr,"Command and control Carrier (squelch) is ON\n");
+		    c2cStatus = 1;
+	    } else {
+		    fprintf(stderr,"Command and control DTMF or APRS is ON\n");
+		    c2cStatus = 2;
+	    }
+  }	
+  printf("c2cStatus: %d \n", c2cStatus);
+	
+  char resbuffer[1000];
+//  const char testStr[] = "cat /proc/cpuinfo | grep 'Revision' | awk '{print $3}' | sed 's/^1000//' | grep '9000'";
+  const char testStr[] = "cat /proc/cpuinfo | grep 'Revision' | awk '{print $3}' | sed 's/^1000//'";
+  FILE *file_test = sopen(testStr);  // see if Pi Zero 2  
+  fgets(resbuffer, 1000, file_test);
+  fprintf(stderr, "Pi test result: %s\n", resbuffer);
+  fclose(file_test);	
+
+  FILE * uptime_file = fopen("/proc/uptime", "r");
+  fscanf(uptime_file, "%f", & uptime_sec);
+  printf("Uptime sec: %f \n", uptime_sec);	  
+  fclose(uptime_file);
+  
+  fprintf(stderr, " %x ", resbuffer[0]);
+  fprintf(stderr, " %x \n", resbuffer[1]);	
+  if ((resbuffer[0] != '9') || (resbuffer[1] != '0') || (resbuffer[2] != '0') || (resbuffer[3] != '0')) 
+  {
+    // voltageThreshold = 3.7;
+    fprintf(stderr, "Pi Zero not detected (could be Pi Zero 2)\n");
+    pi_zero_2_offset = 500;
+    if (uptime_sec < 30.0) {
+	FILE * rpitx_stop = popen("sudo systemctl start rpitx", "r");
+  	pclose(rpitx_stop);   
+        fprintf(stderr, "Sleep 5 sec");    
+	sleep(5);  // try sleep at start to help boot
+    }
+  }
+  else {
+    fprintf(stderr,"Pi Zero detected\n");
+    if ((c2cStatus == 0) || (c2cStatus == 1))  {
+      pi_zero_2_offset = 500;
+    }
+    if (uptime_sec < 30.0) {
+      FILE * rpitx_stop = popen("sudo systemctl start rpitx", "r");
+      pclose(rpitx_stop);
+      fprintf(stderr,"Sleep 10 sec");    
+      sleep(10);
+    }
   }
 	
 //  FILE * rpitx_stop = popen("sudo systemctl stop rpitx", "r");
@@ -1565,6 +1568,28 @@ void get_tlm_fox() {
       (i2c_bus0 == OFF) * 16 + (i2c_bus1 == OFF) * 32 + (i2c_bus3 == OFF) * 64 + (camera == OFF) * 128 + groundCommandCount * 256;
 
     encodeA(b, 51 + head_offset, status);
+	  
+  FILE * command_file = fopen("/home/pi/CubeSatSim/command_control", "r");
+  if (command_file == NULL) {
+	    if (c2cStatus != 0) {
+	      fprintf(stderr,"Command and control is OFF\n");
+	      c2cStatus = 0;
+	    }
+  } else {
+	    command_file = fopen("/home/pi/CubeSatSim/command_control_direwolf", "r");
+	    if (command_file == NULL)  {
+	      if (c2cStatus != 1) {
+		    fprintf(stderr,"Command and control Carrier (squelch) is ON\n");
+		    c2cStatus = 1;
+	      }
+	    } else {
+		if (c2cStatus != 2) {
+		    fprintf(stderr,"Command and control DTMF or APRS is ON\n");
+		    c2cStatus = 2;
+		}
+	    }
+  }	
+  // printf("c2cStatus: %d \n", c2cStatus);	  
     encodeB(b, 52 + head_offset, rxAntennaDeployed + txAntennaDeployed * 2 + c2cStatus * 4);
 
     if (txAntennaDeployed == 0) {

rpitx.py

@@ -363,7 +363,8 @@ if __name__ == "__main__":
 #			ser.write(b"AT+DMOSETGROUP=0,435.0000,434.9000,0,3,0,0\r\n")
 			ser.write(uhf_string.encode())
 			sleep(0.1)
-		ser.close()	
+		ser.close()
+		ser = serial.Serial("/dev/ttyAMA0", 115200) # reset back to 115200 for cubesatsim code for payload sensor data
 	except:
 		print("Error in serial write")
 	output(pd, 0)

spacecraft/FoxTelem_1.13e/CubeSatSim_PSK_maxtelemetry.csv

@@ -44,7 +44,7 @@
 42,MAX,GroundCommands,4,-,1,NONE,3,3,0,Ground Commands,Number of ground commands received
 43,MAX,RxAntenna,1,-,16,NONE,1,3,0,RX Antenna,Receive antenna status
 44,MAX,TxAntenna,1,-,16,NONE,1,2,0,TX Antenna,Transmit antenna status
-45,MAX,C2CStatus,1,-,STATUS_ON_OFF,NONE,3,5,0,Command Control, Command & Control Status
+45,MAX,C2CStatus,2,-,COMMAND_STATUS,NONE,3,5,0,Command Control, Command & Control Status
 46,MAX,ICR3VProt,12,V,43,NONE,7,2,3,3V Prot,ICR 3V Proteted
 47,MAX,ICR2dot5V,12,V,43,NONE,7,3,3,2.5V,ICR 2.5V
 48,MAX,ICR2dot5VProt,12,V,43,NONE,7,4,3,2.5V Prot,ICR 2.5V Protected
@@ -59,4 +59,4 @@
 57,MAX,swCmds,32,-,35,NONE,7,6,0,Diagnostic,ICR Diagnostic information
 58,MAX,hwCmdCnt,6,-,1,NONE,7,7,0,HW Command Count,Number of hardware commands since last reset
 59,MAX,swCmdCnt,6,-,1,NONE,7,8,0,SW Command Count,Number of software commands since last reset
-60,MAX,pad2,28,-,0,NONE,0,0,0,NONE,Filler
+60,MAX,pad2,27,-,0,NONE,0,0,0,NONE,Filler

spacecraft/FoxTelem_1.13e/CubeSatSim_PSK_mintelemetry.csv

@@ -44,7 +44,7 @@
 42,MIN,GroundCommands,4,-,1,NONE,3,3,0,Ground Commands,Number of ground commands received
 43,MIN,RxAntenna,1,-,16,NONE,1,3,0,RX Antenna,Receive antenna status
 44,MIN,TxAntenna,1,-,16,NONE,1,2,0,TX Antenna,Transmit antenna status
-45,MIN,C2CStatus,1,-,STATUS_ON_OFF,NONE,3,5,0,Command Control, Command & Control Status
+45,MIN,C2CStatus,2,-,COMMAND_STATUS,NONE,3,5,0,Command Control, Command & Control Status
 46,MIN,ICR3VProt,12,V,43,NONE,7,2,3,3V Prot,ICR 3V Proteted
 47,MIN,ICR2dot5V,12,V,43,NONE,7,3,3,2.5V,ICR 2.5V
 48,MIN,ICR2dot5VProt,12,V,43,NONE,7,4,3,2.5V Prot,ICR 2.5V Protected
@@ -59,4 +59,4 @@
 57,MIN,swCmds,32,-,35,NONE,7,6,0,Diagnostic,ICR Diagnostic information
 58,MIN,hwCmdCnt,6,-,1,NONE,7,7,0,HW Command Count,Number of hardware commands since last reset
 59,MIN,swCmdCnt,6,-,1,NONE,7,8,0,SW Command Count,Number of software commands since last reset
-60,MIN,pad2,28,-,0,NONE,0,0,0,NONE,Filler
+60,MIN,pad2,27,-,0,NONE,0,0,0,NONE,Filler

spacecraft/FoxTelem_1.13e/CubeSatSim_PSK_rttelemetry.csv

@@ -44,7 +44,7 @@
 42,realTime,GroundCommands,4,-,1,Computer Software,3,3,0,Ground Commands,Number of ground commands received
 43,realTime,RxAntenna,1,-,16,Radio,1,3,0,RX Antenna,Receive antenna status
 44,realTime,TxAntenna,1,-,16,Radio,1,2,0,TX Antenna,Transmit antenna status
-45,realTime,C2CStatus,1,-,STATUS_ON_OFF,Computer Software,3,5,0,Command Control, Command & Control Status
+45,realTime,C2CStatus,2,-,COMMAND_STATUS,Computer Software,3,5,0,Command Control, Command & Control Status
 46,realTime,ICR3VProt,12,V,43,NONE,7,2,3,3V Prot,ICR 3V Proteted
 47,realTime,ICR2dot5V,12,V,43,NONE,7,3,3,2.5V,ICR 2.5V
 48,realTime,ICR2dot5VProt,12,V,43,NONE,7,4,3,2.5V Prot,ICR 2.5V Protected
@@ -59,4 +59,4 @@
 57,realTime,swCmds,32,-,35,NONE,7,6,0,Diagnostic,ICR Diagnostic information
 58,realTime,hwCmdCnt,6,-,1,NONE,7,7,0,HW Command Count,Number of hardware commands since last reset
 59,realTime,swCmdCnt,6,-,1,NONE,7,8,0,SW Command Count,Number of software commands since last reset
-60,realTime,pad2,28,-,0,NONE,0,0,0,NONE,Filler
+60,realTime,pad2,27,-,0,NONE,0,0,0,NONE,Filler

spacecraft/FoxTelem_1.13e/CubeSatSim_maxtelemetry.csv

@@ -44,5 +44,5 @@
 42,MAX,GroundCommands,4,-,1,NONE,3,3,0,Ground Commands,Number of ground commands received
 43,MAX,RXAntenna,1,-,16,NONE,1,3,0,RX Antenna,Receive antenna status
 44,MAX,TXAntenna,1,-,16,NONE,1,2,0,TX Antenna,Transmit antenna status
-45,MAX,C2CStatus,1,-,STATUS_ON_OFF,NONE,3,5,0,Command Control, Command & Control Status
-46,MAX,Pad,57,-,0,NONE,0,0,0,NONE,NONE
+45,MAX,C2CStatus,2,-,COMMAND_STATUS,NONE,3,5,0,Command Control, Command & Control Status
+46,MAX,Pad,56,-,0,NONE,0,0,0,NONE,NONE

spacecraft/FoxTelem_1.13e/CubeSatSim_mintelemetry.csv

@@ -44,5 +44,5 @@
 42,MIN,GroundCommands,4,-,1,NONE,3,3,0,Ground Commands,Number of ground commands received
 43,MIN,RXAntenna,1,-,16,NONE,1,3,0,RX Antenna,Receive antenna status
 44,MIN,TXAntenna,1,-,16,NONE,1,2,0,TX Antenna,Transmit antenna status
-45,MIN,C2CStatus,1,-,STATUS_ON_OFF,NONE,3,5,0,Command Control, Command & Control Status
-46,MIN,Pad,57,-,0,NONE,0,0,0,NONE,NONE
+45,MIN,C2CStatus,2,-,COMMAND_STATUS,NONE,3,5,0,Command Control, Command & Control Status
+46,MIN,Pad,56,-,0,NONE,0,0,0,NONE,NONE

spacecraft/FoxTelem_1.13e/CubeSatSim_rttelemetry.csv

@@ -44,5 +44,5 @@
 42,RT,GroundCommands,4,-,1,Computer Software,3,3,0,Ground Commands,Number of ground commands received
 43,RT,RXAntenna,1,-,16,Radio,1,3,0,RX Antenna,Receive antenna status
 44,RT,TXAntenna,1,-,16,Radio,1,2,0,TX Antenna,Transmit antenna status
-45,RT,C2CStatus,1,-,COMMAND_STATUS,Computer Software,3,5,0,Command Control, Command & Control Status
-46,RT,Pad,57,-,0,NONE,0,0,0,NONE,NONE
+45,RT,C2CStatus,2,-,COMMAND_STATUS,Computer Software,3,5,0,Command Control, Command & Control Status
+46,RT,Pad,56,-,0,NONE,0,0,0,NONE,NONE

spacecraft/FoxTelem_1.13e/CubeSat_Simulator_PSK.MASTER

@@ -0,0 +1,77 @@
+#Fox 1 Telemetry Decoder Properties
+#Thu Apr 11 13:23:23 EST 2020
+user_mode=4
+foxId=99
+IHU_SN=7
+catalogNumber=0
+model=0
+mpptResistanceError=6.58
+mpptSensorOffThreshold=1600
+name=CubeSatSim
+displayName=CubeSatSim-BPSK
+BATTERY_CURRENT_ZERO=-1.834
+hasImprovedCommandReceiver=true
+EXP1=0
+EXP2=0
+EXP3=0
+EXP4=0
+description=CubeSatSim, the AMSAT CubeSat Simulator, is a functional satellite model that generates real telemetry from solar panels, batteries, and temperature sensors.  Use this for BPSK telemetry. For more information see http://cubesatsim.org
+numberOfFrameLayouts=5
+frameLayout0.filename=FOX1E_Type0_ALL_WOD.frame
+frameLayout0.name=All WOD
+frameLayout1.filename=CubeSatSim_PSK_Type1_HEALTH.frame
+frameLayout1.name=Health
+frameLayout2.filename=CubeSatSim_PSK_Type2_MINMAX.frame
+frameLayout2.name=MinMax
+frameLayout3.filename=FOX1E_Type3_REALTIME_BEACON.frame
+frameLayout3.name=Realtime Beacon
+frameLayout4.filename=FOX1E_Type4_WOD_BEACON.frame
+frameLayout4.name=WOD Beacon
+numberOfLayouts=9
+layout0.filename=FOX1A_debug.csv
+layout0.name=DEBUG
+layout1.filename=CubeSatSim_PSK_maxtelemetry.csv
+layout1.name=maxtelemetry
+layout2.filename=CubeSatSim_PSK_rttelemetry.csv
+layout2.name=rttelemetry
+layout3.filename=CubeSatSim_PSK_mintelemetry.csv
+layout3.name=mintelemetry
+layout4.filename=FOX1E_radtelemetry.csv
+layout4.name=radtelemetry
+layout5.filename=FOX1E_radtelemetry2.csv
+layout5.name=radtelemetry2
+layout5.parentLayout=radtelemetry
+layout6.filename=CubeSatSim_PSK_wodtelemetry.csv
+layout6.name=wodtelemetry
+layout7.filename=FOX1E_wodradtelemetry.csv
+layout7.name=wodradtelemetry
+layout8.filename=FOX1E_wodradtelemetry2.csv
+layout8.name=wodradtelemetry2
+layout8.parentLayout=wodradtelemetry
+numberOfLookupTables=3
+lookupTable0.filename=FOX1A_rssiFM.tab
+lookupTable0=RSSI
+lookupTable1.filename=FOX1E_ihuVBattSNx.tab
+lookupTable1=IHU_VBATT
+lookupTable2.filename=FOX1A_ihutempSN7.tab
+lookupTable2=IHU_TEMP
+numberOfStringLookupTables=2
+stringLookupTable0.filename=status_on_off.tab
+stringLookupTable0=STATUS_ON_OFF
+stringLookupTable1=COMMAND_STATUS
+stringLookupTable1.filename=command_status.tab
+maxFreqBoundkHz=434950
+measurementsFileName=measurements.csv
+memsRestValueX=2129
+memsRestValueY=2131
+memsRestValueZ=2103
+minFreqBoundkHz=434850
+passMeasurementsFileName=passmeasurements.csv
+telemetryDownlinkFreqkHz=434900
+track=true
+useIHUVBatt=false
+numberOfSources=1
+source0.name=amsat.cubesat_simulator.ihu.bpsk
+user_format=0
+useConversionCoeffs=true
+conversionCurvesFileName=CubeSatSim_conversion_curves.csv