added get_tlm_fox

afsk/main.c

@@ -60,8 +60,8 @@ ax25_conf_t hax25;
 
 static void init_rf();
 int twosToInt(int val, int len);
-//int get_tlm(int tlm[][5]);
 int get_tlm(char *str);
+int get_tlm_fox(char *str);
 void config_x25();
 void trans_x25();
 int upper_digit(int number);
@@ -186,9 +186,6 @@ int main(int argc, char *argv[]) {
   //setSpiSpeed(SPI_SPEED);
   //initializeSpi();
 
-//  int tlm[7][5];
-//  memset(tlm, 0, sizeof tlm);
-
   tempSensor = config_sensor("/dev/i2c-3", 0x48, 0);
 	
   sensor[PLUS_X]  = config_sensor("/dev/i2c-1", 0x40, 400); 
@@ -229,7 +226,7 @@ int main(int argc, char *argv[]) {
     #ifdef DEBUG_LOGGING
       fprintf(stderr,"INFO: Preparing X.25 packet\n");
     #endif
-	  printf("Tlm: %s \n", str);
+	  printf("%s \n", str);
 /*	  
     digitalWrite (0, LOW); 
   
@@ -389,6 +386,51 @@ int get_tlm(char *str) {
   return 0;
 }
 
+int get_tlm_fox(char *str) {
+	
+  int tlm[7][5];
+  memset(tlm, 0, sizeof tlm);
+	
+//  Reading I2C voltage and current sensors
+  int count;
+  for (count = 0; count < 8; count++)
+  {
+    reading[count] = read_sensor_data(sensor[count]);	
+    #ifdef DEBUG_LOGGING
+      printf("Read sensor[%d] % 4.2fV % 6.1fmA % 6.1fmW \n", 
+	        count, reading[count].voltage, reading[count].current, reading[count].power); 
+    #endif
+  }
+	    
+  tlm[1][A] = (int)(reading[BUS].voltage /15.0 + 0.5) % 100;  // Current of 5V supply to Pi
+  tlm[1][B] = (int) (99.5 - reading[PLUS_X].current/10.0) % 100;  // +X current [4]
+  tlm[1][C] = (int) (99.5 - reading[MINUS_X].current/10.0) % 100;  			// X- current [10] 
+  tlm[1][D] = (int) (99.5 - reading[PLUS_Y].current/10.0) % 100;  // +Y current [7]
+
+  tlm[2][A] = (int) (99.5 - reading[MINUS_Y].current/10.0) % 100;  			// -Y current [10] 
+  tlm[2][B] = (int) (99.5 - reading[PLUS_Z].current/10.0) % 100;  // +Z current [10] // was 70/2m transponder power, AO-7 didn't have a Z panel
+  tlm[2][C] = (int) (99.5 - reading[MINUS_Z].current/10.0) % 100;  			// -Z current (was timestamp)
+  tlm[2][D] = (int)(50.5 + reading[BAT].current/10.0) % 100;   // NiMH Battery current
+	
+  tlm[3][A] = abs((int)((reading[BAT].voltage * 10.0) - 65.5) % 100);
+  tlm[3][B] = (int)(reading[BUS].voltage * 10.0) % 100;      // 5V supply to Pi
+		   	
+  if (tempSensor.fd != OFF) {
+    int tempValue = wiringPiI2CReadReg16(tempSensor.fd, 0); 
+    uint8_t upper = (uint8_t) (tempValue >> 8);
+    uint8_t lower = (uint8_t) (tempValue & 0xff);
+    float temp = (float)lower + ((float)upper / 0x100);
+	  
+    #ifdef DEBUG_LOGGING
+      printf("Temp Sensor Read: %6.1f\n", temp);
+    #endif
+	  
+    tlm[4][A] = (int)((95.8 - temp)/1.48 + 0.5) % 100;
+  }
+return 0;
+	
+}
+
 int twosToInt(int val,int len) {   // Convert twos compliment to integer
 // from https://www.raspberrypi.org/forums/viewtopic.php?t=55815