Digital_Voice_Modem_Project
/
dvmhost
mirror of https://github.com/DVMProject/dvmhost.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'abb57affe2'
${ noResults }
dvmhost/configs/config.example.yml

576 lines
23 KiB
Raw Blame History

#
# Digital Voice Modem - Host Software Configuration
#
# @package DVM / Host Software
#
# Flag indicating whether the host will run as a background or foreground task.
daemon: true
#
# Logging Configuration
#
# Logging Levels:
# 1 - Debug
# 2 - Message
# 3 - Informational
# 4 - Warning
# 5 - Error
# 6 - Fatal
#
log:
# Console display logging level (used when in foreground).
displayLevel: 1
# File logging level.
fileLevel: 1
# Full path for the directory to store the log files.
filePath: .
# Full path for the directory to store the activity log files.
activityFilePath: .
# Log filename prefix.
fileRoot: DVM
#
# Network Configuration
#
network:
# Flag indicating whether or not host networking is enabled.
enable: true
# Network Peer ID
id: 100000
# Hostname/IP address of the FNE to connect to.
address: 127.0.0.1
# Port number of the FNE to connect to.
port: 62031
# FNE access password.
password: "PASSWORD"
# Maximum allowable DMR network jitter.
jitter: 360
# Flag indicating whether DMR slot 1 traffic will be passed.
slot1: true
# Flag indicating whether DMR slot 2 traffic will be passed.
slot2: true
# Flag indicating whether the local host lookup tables (RID, TGID, etc) will be updated from the network.
updateLookups: false
# Flag indicating whether or not the host activity log will be sent to the network.
allowActivityTransfer: true
# Flag indicating whether or not the host diagnostic log will be sent to the network.
allowDiagnosticTransfer: true
# Flag indicating whether or not verbose debug logging is enabled.
debug: false
# Flag indicating whether or not REST API is enabled.
restEnable: false
# IP address of the network interface to listen for REST API on (or 0.0.0.0 for all).
restAddress: 127.0.0.1
# Port number for REST API to listen on.
restPort: 9990
# REST API authentication password.
restPassword: "PASSWORD"
# Flag indicating whether or not verbose REST API debug logging is enabled.
restDebug: false
#
# Digital Protocol Configuration
#
protocols:
#
# Digital Mobile Radio
#
dmr:
# Flag indicating whether or not the protocol is enabled.
enable: true
#
# DMR Roaming Beacon (and TSCC) Timing Configuration
#
beacons:
# Flag indicating whether or not DMR roaming beacons are enabled.
enable: false
# Time between roaming beacon bursts. (seconds)
interval: 60
# Amount of time to transmit roaming beacon. (seconds)
duration: 3
#
# DMR Timeslot Control Channel (TSCC) Configuration
#
control:
# Flag indicating whether or not this TSCC is a dedicated CC.
dedicated: false
# Flag indicating whether or not TSCC is enabled.
enable: false
# DMR slot number to transmit TSCC data on.
slot: 1
# Flag indicating whether or not the source ID validation before granting disabled.
disableGrantSourceIdCheck: false
# Flag indicating whether or not received RF embedded LC data only should be transmitted.
embeddedLCOnly: false
# Flag indicating whether talker alias data should be dumped to the log.
dumpTAData: true
# Flag indicating whether verbose dumping of DMR data packets is enabled.
dumpDataPacket: false
# Flag indicating whether or not this host will repeat DMR data traffic.
repeatDataPacket: true
# Flag indicating whether verbose dumping of DMR CSBK data is enabled.
dumpCsbkData: false
# Flag indicating unit registration will be verified after some operations.
verifyReg: false
# Specifies the random wait delay for a subscriber.
# (This should not be altered.)
nRandWait: 8
# Specifies the random back-off count in DMR TDMA frames.
# (This should not be altered.)
backOff: 1
# Amount of time to hang after a voice call.
callHang: 5
# Amount of time to continue transmitting after the end of traffic.
txHang: 8
# BER/Error threshold for silencing voice packets. (0 or 141 disables)
silenceThreshold: 21
# Maximum number of lost frames before terminating a call.
frameLossThreshold: 2
# Internal data queue size (in DMR packets).
queueSize: 31
# Flag indicating whether or not verbose logging is enabled.
verbose: true
# Flag indicating whether or not debug logging is enabled.
debug: false
#
# Project 25
#
p25:
# Flag indicating whether or not the protocol is enabled.
enable: true
# Sets the number of TDU preambles to transmit at the start of a transmission.
tduPreambleCount: 6
#
# P25 Control Channel Configuration
#
control:
# Flag indicating whether or not CC is enabled.
enable: false
# Flag indicating whether or not the CC will optionally acknowledge incoming requests.
ackRequests: true
# Flag indicating whether or not this CC is a dedicated CC.
dedicated: false
# Flag indicating whether CC data will be broadcast.
broadcast: true
# Time between non-dedicated CC broadcasts. (seconds)
interval: 300
# Amount of time to transmit non-dedicated CC broadcasts. (seconds)
duration: 1
# Flag to disable TSDU triple-block transmissions and instead transmit single-block TSDUs.
disableTSDUMBF: false
# Flag to enable optional TIME_DATE_ANNC TSBK during a CC broadcast.
enableTimeDateAnn: false
# Flag indicating whether or not the source ID validation before granting disabled.
disableGrantSourceIdCheck: false
# Flag indicating immediate TSDUs will be sent twice.
redundantImmediate: true
# Flag indicating whether redundant grant responses should be transmitted.
# (This is useful for single-channel VOC (voice on control) configurations.)
redundantGrantTransmit: false
# Flag indicating whether or not VOC (voice on control) support is enabled.
voiceOnControl: false
# Flag indicating whether or not to ignore voice frames on a control channel
# This comes in handy if you're running non-dedicated with an FNE so the CC doesn't repeat voice traffic
controlOnly: false
# Flag indicating whether or not the composite flag in the CC service options is set.
# (This is useful to disable for some radios when running in VOC mode.)
disableCompositeFlag: false
# Flag indicating whether or not a voice HDU will transmitted at the start of a call from the network.
disableNetworkHDU: false
# Flag indicating whether or not network calls will generate a channel grant.
# (This applies only in conventional operations where channel granting is utilized and RF-only talkgroup
# steering is required.)
disableNetworkGrant: false
# Flag indicating that the host will attempt to automatically inhibit unauthorized RIDs (those not in the
# RID ACL list).
inhibitUnauthorized: false
# Flag indicating the fallback legacy group grant for radios that do not support group affilition to
# have group grants transmitted. (Useful for alerting the FNE to affiliations to TGIDs for radios that
# do not properly support group affiliation.)
legacyGroupGrnt: true
# Flag indicating the fallback legacy group registration. (Same as above except for group affiliations.)
legacyGroupReg: false
# Flag indicating the host should verify group affiliation.
verifyAff: false
# Flag indicating the host should verify unit registration.
verifyReg: false
# Flag indicating whether verbose dumping of P25 data packets is enabled.
dumpDataPacket: false
# Flag indicating whether or not this host will repeat P25 data traffic.
repeatDataPacket: true
# Flag indicating whether verbose dumping of P25 TSBK data is enabled.
dumpTsbkData: false
# Amount of time to hang after a voice call.
callHang: 5
# Flag indicating whether or not the host will acknowledge status packets.
noStatusAck: false
# Flag indicating whether or not the host will acknowledge message packets.
noMessageAck: true
# Flag indicating that unit-to-unit availiability checks should be performed for a private call.
unitToUnitAvailCheck: true
# Flag indicating explicit source ID support is enabled.
allowExplicitSourceId: true
# Flag indicating whether or not the host will respond to SNDCP data grant requests.
sndcpGrant: false
# BER/Error threshold for silencing voice packets. (0 or 1233 disables)
silenceThreshold: 124
# Maximum number of lost frames before terminating a call.
frameLossThreshold: 6
# Internal data queue size (in P25 packets).
queueSize: 12
# Flag indicating whether or not verbose logging is enabled.
verbose: true
# Flag indicating whether or not debug logging is enabled.
debug: false
#
# Next Generation Digital Narrowband
#
nxdn:
# Flag indicating whether or not the protocol is enabled.
enable: false
#
# NXDN Control Channel Configuration
#
control:
# Flag indicating whether or not CC is enabled.
enable: false
# Flag indicating whether or not this CC is a dedicated CC.
dedicated: false
# Flag indicating whether CC data will be broadcast.
broadcast: true
# Time between non-dedicated CC broadcasts. (seconds)
interval: 300
# Amount of time to transmit non-dedicated CC broadcasts. (seconds)
duration: 1
# Flag indicating whether or not the source ID validation before granting disabled.
disableGrantSourceIdCheck: false
# Flag indicating whether or not VOC (voice on control) support is enabled.
voiceOnControl: false
# Flag indicating whether or not the composite flag in the CC service options is set.
disableCompositeFlag: false
# Flag indicating the host should verify group affiliation.
verifyAff: false
# Flag indicating the host should verify unit registration.
verifyReg: false
# Flag indicating whether verbose dumping of NXDN RCCH data is enabled.
dumpRcchData: false
# Amount of time to hang after a voice call.
callHang: 5
# BER/Error threshold for silencing voice packets. (0 or 144 disables)
silenceThreshold: 14
# Maximum number of lost frames before terminating a call.
frameLossThreshold: 4
# Internal data queue size (in NXDN packets).
queueSize: 31
# Flag indicating whether or not verbose logging is enabled.
verbose: true
# Flag indicating whether or not debug logging is enabled.
debug: false
#
# System Configuration
#
system:
# Textual label of this host.
identity: ABCD123
# Total call transmit time maximum. (seconds)
timeout: 180
# Flag indicating whether or not the host is operating in duplex (simultaneous Rx/Tx) or simplex operation.
duplex: true
# Flag indicating whether or not the host should utilize the same frequency in simplex operation
# (instead of split frequency).
simplexSameFrequency: false
# Amount of time the host will "hang" on a digital mode in multi-mode operation. (seconds)
modeHang: 10
# Amount of time the host will "hang" on a RF received digital mode in multi-mode operation. (seconds)
# rfModeHang: 10
# Amount of time the host will "hang" on a network received digital mode in multi-mode operation. (seconds)
# netModeHang: 10
# Flag indicating the host is operating in a single digital mode.
fixedMode: false
# Amount of time the host will "hang" on the last TGID received via RF before returning to allowing all
# TGID traffic. This applies only to network traffic, it essentially allows time-based filtering of network
# traffic for the last TGID received.
rfTalkgroupHang: 10
# Sets the amount of delay between "ticks" of the processing loop when the host is active (i.e.
# processing traffic). (ms) [Note: Default value is recommend, normally this should not be changed.]
activeTickDelay: 5
# Sets the amount of delay between "ticks" of the processing loop when the host is idle (i.e. not
# processing traffic). (ms) [Note: Default value is recommend, normally this should not be changed.]
idleTickDelay: 5
# Sets the local time offset from GMT.
localTimeOffset: 0
#
# Location Information
# (This is used mainly for reporting the location of the host to a connected network.)
#
info:
# Latitude.
latitude: -83.689428
# Longitude.
longitude: -39.194973
# Height (in meters).
height: 1
# Transmit Power (in watts).
power: 10
# Textual location for this host.
location: "Repeater Site, Antarctica"
#
# Site Configuration
#
config:
# Flag indicating whether or not this host is authoritative (i.e. will automatically handle channel grant) for TGID operations.
authoritative: true
# Flag indicating whether or not this host acts as a supervisor (i.e. will automatically handle permission) for voice channel TGID permission.
supervisor: false
# Channel Identity (corresponds to the appropriate entry in the iden_table file).
channelId: 2
# Channel Number (used to calculate actual host frequency based on the identity table).
channelNo: 1
#
# Control Channel
# Note: These parameters are used by a voice channel to communicate back to a
# control channel to give the control channel "real time" traffic channel updates.
#
controlCh:
# REST API IP Address for control channel. (If blank, notifications are disabled.)
restAddress:
# REST API Port number for control channel. (If 0, notifications are disabled.)
restPort: 0
# REST API access password for control channel.
restPassword: "PASSWORD"
# Flag indicating voice channels will notify the control channel of traffic status.
notifyEnable: true
#
# Voice Channels
#
voiceChNo:
# Channel Number (used to calculate actual host frequency based on the identity table).
- channelNo: 1
# REST API IP Address for voice channel.
restAddress: 127.0.0.1
# REST API Port number for voice channel.
restPort: 9990
# REST API access password for voice channel.
restPassword: "PASSWORD"
# DMR Color Code.
colorCode: 1
# P25 Network Access Code (NAC). (Rx/Tx)
nac: 293
# P25 Network Access Code (NAC). (Overrides the above for Tx when set.)
# txNAC: 293
# NXDN Random Access Number.
ran: 1
# Patch Super Group.
pSuperGroup: FFFE
# Announcment Talkgroup Group.
announcementGroup: FFFE
# DMR network ID.
dmrNetId: 1
# P25 Network ID (WACN).
netId: BB800
# P25/NXDN System ID.
sysId: 001
# P25 RFSS (RF Sub-System) ID.
rfssId: 1
# DMR/P25/NXDN Site ID.
siteId: 1
#
# CW ID Configuration
#
cwId:
# Flag indicating whether or not CWID is enabled.
enable: true
# Amount of time between CWID transmissions. (minutes)
time: 15
# Callsign to be transmitted.
callsign: ABCD123
#
# Modem Configuration
#
modem:
#
# Protocol Configuration
#
protocol:
# Modem port type.
type: "null" # Valid values are "null", and "uart"
uart:
# UART/RS232 serial port device.
port: /dev/ttyUSB0
# UART/RS232 serial port speed. (The default speed of 115200, should not be
# changed unless the speed is also changed in the firmware of the modem.)
speed: 115200
# Flag indicating whether or not the recieved signal is polarity inverted.
rxInvert: false
# Flag indicating whether or not the transmitted signal is polarity inverted.
txInvert: false
# Flag indicating whether or not the modem PTT signal should be active low.
pttInvert: false
# Flag indicating whether or not the modem DC noise blocker filter is enabled.
dcBlocker: true
# Flag indicating whether or not the modem COS signal should lockout transmit.
cosLockout: false
# Number of FDMA preambles to transmit before data.
fdmaPreamble: 80
# Amount of time to wait before starting DMR transmissions after a signal is received.
dmrRxDelay: 7
# Amount of packet correlations that should occur before P25 data is returned from the modem to the host.
# (Note: Changing this value will impact P25 protocol stability, and should not be altered.)
p25CorrCount: 8
# Size (in bytes) of the DMR transmit FIFO buffer.
dmrFifoLength: 505
# Size (in bytes) of the P25 transmit FIFO buffer.
p25FifoLength: 442
# Size (in bytes) of the NXDN transmit FIFO buffer.
nxdnFifoLength: 538
#
# Hotspot Modem Configuration
#
hotspot:
# DMR Discriminator Bandwidth Adjustment.
dmrDiscBWAdj: 0 # Valid values between -128 and 128
# DMR Post Demodulator Bandwidth Adjustment.
dmrPostBWAdj: 0 # Valid values between -128 and 128
# P25 Discriminator Bandwidth Adjustment.
p25DiscBWAdj: 0 # Valid values between -128 and 128
# P25 Post Demodulator Bandwidth Adjustment.
p25PostBWAdj: 0 # Valid values between -128 and 128
# NXDN Discriminator Bandwidth Adjustment.
nxdnDiscBWAdj: 0 # Valid values between -128 and 128
# NXDN Post Demodulator Bandwidth Adjustment.
nxdnPostBWAdj: 0 # Valid values between -128 and 128
# LNA Gain Mode.
adfGainMode: 2 # 0 - Auto, 1 - Auto High Lin, 2 - Low, 3 - High
# Flag indicating whether the ADF7021's automatic frequency correction is enabled.
afcEnable: true
# Don't change this. See the ADF7021 datasheet for more information.
afcKI: 13
# Don't change this. See the ADF7021 datasheet for more information.
afcKP: 5
# Sets the maximum frequency correction range of the ADF7021.
# (It is highly recommended *not* to alter this.)
afcRange: 1
# Sets the transmit frequency offset. (in Hz)
txTuning: 0
# Sets the receive frequency offset. (in Hz)
rxTuning: 0
#
# Repeater Modem Configuration
#
repeater:
# DMR +3/-3 symbol level adjustment.
dmrSymLvl3Adj: 0 # Valid values between -128 and 128
# DMR +1/-1 symbol level adjustment.
dmrSymLvl1Adj: 0 # Valid values between -128 and 128
# P25 +3/-3 symbol level adjustment.
p25SymLvl3Adj: 0 # Valid values between -128 and 128
# P25 +1/-1 symbol level adjustment.
p25SymLvl1Adj: 0 # Valid values between -128 and 128
# NXDN +3/-3 symbol level adjustment.
nxdnSymLvl3Adj: 0 # Valid values between -128 and 128
# NXDN +1/-1 symbol level adjustment.
nxdnSymLvl1Adj: 0 # Valid values between -128 and 128
#
# (Optional) Software Potentiometer Configuration
# [Note: This only applies to DVM board which include such support.]
#
softpot:
rxCoarse: 127
rxFine: 127
txCoarse: 127
txFine: 127
rssiCoarse: 127
rssiFine: 127
# Sets received the signal offset from DC.
rxDCOffset: 0 # Valid values between -128 and 128
# Sets transmitted the signal offset from DC.
txDCOffset: 0 # Valid values between -128 and 128
# Sets the received signal modulation level.
rxLevel: 50
# Sets the transmitted signal modulation level.
txLevel: 50
# Sets the transmitted CWID signal modulation level.
# cwIdTxLevel: 50
# Sets the transmitted DMR signal modulation level.
# dmrTxLevel: 50
# Sets the transmitted P25 signal modulation level.
# p25TxLevel: 50
# Sets the transmitted NXDN signal modulation level.
# nxdnTxLevel: 50
rssiMappingFile: RSSI.dat
# Deprecated. Sets the playout time in seconds between sending buffered data to the modem.
packetPlayoutTime: 10
# Flag indicating that modem resets due to ADC or DAC overflows is disabled.
disableOFlowReset: false
# Flag indicating that the modem configuration area data should be ignored.
ignoreModemConfigArea: false
# Flag indicating whether verbose dumping of the modem status is enabled.
dumpModemStatus: false
# Flag indicating whether or not trace logging is enabled.
trace: false
# Flag indicating whether or not debug logging is enabled.
debug: false
#
# Channel Identity Table Configuration
#
iden_table:
# Full path to the identity table file.
file: iden_table.dat
# Amount of time between updates of identity table file. (minutes)
time: 30
#
# Radio ID ACL Configuration
#
radio_id:
# Full path to the RID ACL file.
file: rid_acl.dat
# Amount of time between updates of RID ACL file. (minutes)
time: 2
# Flag indicating whether or not RID ACLs are enforced.
acl: false
#
# Talkgroupd ID ACL Configuration
#
talkgroup_id:
# Full path to the talkgroup rules file.
file: talkgroup_rules.yml
# Amount of time between updates of talkgroup rules file. (minutes)
time: 2
# Flag indicating whether or not TGID ACLs are enforced.
acl: false
Reference in new issue View Git Blame Copy Permalink

Powered by TurnKey Linux.