4 Commits (4aca5792dbb49a9e3ce17e9302c46eb4fcc4e92a)

Author	SHA1	Message	Date
Bryan Biedenkapp	4aca5792db	adjust OSP_QUE_RSP slightly to ensure the service doesn't overflow; fix some minor U2U logic (this kinda sorta makes U2U work); adjust some timing parameters when clearing the modem queues (~5ms delay after writing the command to ensure the modem has time to clear); alter how grants are transmitted on VOC configurations (this will not only transmit a immediate grant but also buffer 3 more as an MBF);	3 years ago
Bryan Biedenkapp	2b6b0c574d	merge 3.5-dev into master, this marks 3.5 alpha/beta release; (#31) ... * implement inital code to support embedded FNE; * continued implementation of embedded FNE; * implement initial core functionality for handling FNE side of DMRD, P25D and NXDD; * update README.md; * refactor and rename files; clarify that the embedded FNE is not a "routing" FNE, but rather, a "conference bridge" FNE; * more cleanups making the conference bridge FNE implementation clearer; * implement proper code for handling peer inclusion/exclusion; implement proper code for validating a call stream; * add missing comments; * make the GCC compiler happy when compiling on 32-bit ARM; make old RPI_ARM compiler happy; * process parrot flag for talkgroup configuration; * deprecate and remove old tg_acl.dat file infavor of the YAML-based talkgroup rules file for the entire host; deprecate and remove custom Mutex class in favor of std::mutex; expand helper routines for the TalkgroupRulesLookup class (backwards compatibility essentially with TalkgroupIdLookup); fix issue in network core that could cause deactivated TGs to try using talkgroup lookups when talkgroup lookups may be unavailable; * support code for future use; * fixup CMakeLists to fix build warnings for ARM 32-bit platform; * update detection for sendmsg and sendmmsg (handles some platforms that don't define sendmmsg); implement container classes for RTP framing; * update CMakeLists to handle new files appropriately; * initial implementation of FrameQueue to generate FNE RTP frames; * fix incorrect return; * implement a typedef for unique_ptr uint8_t arrays; fix issue where DMR, P25 and NXDN control classes were accepting BaseNetwork instead of Network; refactor how FrameQueue handles returning messages read from the network; refactor BaseNetwork, Network and FNENetwork to use FrameQueue instead of raw network writes; * fix issue with handling network state; fix issue handling global network enable flag; fix buffer pointer cleanup; * add option to CMake to selectively utilize the legacy (non-RTP) network protocol (embedded FNE does not support this and will be disabled for USE_LEGACY_NETWORK; cleanup some error messages when trying to initialize and read the configuration file; fix some minor issues in parsing the new talkgroup rules YAML file; complete conversion of BaseNetwork from raw socket to using the new FrameQueue class; refactor the multi-buffer UDPSocket write function to properly send multiple messages in batch down to the kernel driver (on Linux using sendmmsg); add flag to UDPSocket to indicate whether the socket is "open" or not; correct some RTP formatting issues with the extension header (the payload length is in 32-bit units); * remove remaining native WIN32/WIN64 type support code (it was unmaintained anyway); correct issues with network socket reading; cleanup some error messages;q * finally resolve lingering issue with frame queue having random socket issues; * refactor how BufferVector and sendmmsg UDPSocket write operates; refactor FrameQueue to properly queue messages; * properly queue packets to send in bursts to peers; add missing ACKs; add missing MSTPONG; * fix up formatting; remove unnecessary debug statements; * minor cleanups; * remove unused function; * add fields for function and sub-function; * describe network functions and subfunctions; * reorganize some code; add checking for packet sequence; * roll next sequence properly; * utilize typedef for std::unique_ptr<uint8_t[]>; * fix usage of __UNIQUE_BUFFER to __UNIQUE_UINT8_ARRAY; * clean up macro definitions; * implement sequence counting for the FNE conference bridge; * remove USE_LEGACY_NETWORK support; * use macro expansions for this instead of raw buffer lists; * implement actual transmission of new network func/sub-func behavior; * deprecate use of packet tags for determining operation, instead use RTP FNE header function and subfunction bytes; * fix issue with send talkgroups not setting flag to send talkgroups to peers; fix issue when compiling list of activated or deactivated TGs to send to peers; correct strangeness with the RTP sequence counting; fix talkgroup rule lookup on peer when activating or deactivating TGs; * update copyright dates; * complain if the RTP and FNE headers don't agree on stream ID; * for when you forget to update a comment so things actually make sense when you look at it later...; * remove extraneous check, this is really not necessary since FrameQueue does the size validation; * clarify the description of the "embedded FNE"; * merge changes from https://github.com/CVSoft/dvmhost to place spec specific limits on channel spacing; * refactor how network traffic is handled, we don't handle protocol specific stuff within BaseNetwork anymore and offload that to the specific protocol controller instead; implement support to receive peer traffic and repeat (still need to do master to peer); * convert fatal error about Rx frequency being below base frequency to a warning instead; * fix incorrect redefine of slotNo; * correct ret flag for readDMR, readP25 and readNXDN not being set to true by default (stupid me); correct FNE-mode payload offsets for diagnostic packets; * implement option to selectively enable/disable FNE mode verbose logging information; enhance FNE display of network diagnostic logs; refactor dmr::Control::processNetwork(); refactor RTP packet sequence counting; * fix incorrect variable used for out-of-sequence log message; * fix issues with login RTP stream; specially handle certain control opcodes with a different payload type; continued enhancements to sequence counting; * whoops readd accidentally removed block; * backout previous lastPeerId code; properly ensure RTP packet sequence is repeated for traffic calls; * transmit DVM LC_CALL_TERM TSDU at the end of call or if a call drops (hopefully); * don't reset the packet sequence for a RPTPING; * rename some class variables for clarity and prep for some future changes; * add support for priority/immediate Tx queues, these queues are intended to be used sparingly (and mostly for control data) to transmit priority messages [this is an experimental change and may break the build!]; * fix issue where connecting to a non-existent REST API endpoint would crash with an unhandled ASIO exception; * increase timeout delay for the modem by 4 seconds (the original 4 second delay would be too short for some longer operations); * use the immediate queue to prioritize control data in some situations [this is experimental and may break things!]; * reformat headers; * implement toString() functions on TSBKs, CSBKs and RCCHs for future use to replace fixed strings; cleanup DMRDefines slightly; * fix up and simplify RTP timestamp generation; * reduce reliance on fixed strings, instead rely on toString() functions from TSBK, CSBK, and RCCH to ensure string consistency for logging purpsoes; * refactor how and when releaseGrant is called in some situations; ensure channel grant messages traverse the network; * fix reset of error count between network super-frames; * add development helper file for VS Code to configure debug launch parameters; * update CMakeLists to be more condusive to debugging; * cleanup AUTHORS.md; * implement parrot for the conference bridge FNE; implement appropriate call detection logic for conference bridge FNE and attempt to prevent call collisons for the same destination; * add support for altering softpot levels from calibration mode; * bump copyright information; * reorganize CMakeLists; * remove finalcut from the libraries list (this isn't supposed to be included yet!); * implement initial rework of setup/calibration mode into a TUI; add ENABLE_TUI_SUPPORT CMake option to disable *all* project TUI support; add ENABLE_TUI_SETUP CMake option to disable setup TUI support for dvmhost; * properly update isConnected flag; * fix issue with incorrectly placed control; * part 1 of a fix for #30, the change here would be to allow the VCs to know about the CC to be able to report back to it to release or other wise update grants; * part 2 of the fix for #30, this implements the actual logic for a VC to notify the CC of a grant status change (touch, release) [NOTE: this could have undesirable consequences and this commit is experimental!]; * update README.md; * fix terrible copy and paste job resulting in a poor logic check (SMH); print to log the control channel address and port at startup; use the appropriate REST API for touch (whoops); * remove transmit overlay on shell; add F12 hotkey to trigger transmit; implement support to use F2 and F12 from various configuration/calibration modals; correct some mode strangeness when saving; * implement support to adjust FIFO buffer sizes from the host; * add engineering menu to adjust FIFO buffer sizes from setup; * ensure set button state is set properly for these windows; * fix stupid --tags non-sense in the git hash reporting; * ensure certain error conditions for setup mode are displayed when exiting at initial startup; * more fixes to attempt to satisfy #30 (why is this being so difficult!); correct situation where RESTClient may throw an assert instead of handling an error condition nicely; * for #30 allow release tg grant and touch tg grant to work regardless of dedicated CC setting; * file cleanups; * C++11/14 cleanups, class overrides and pure-virtual implementors /worked/ but were not really correct; * stringify modem command and reason messages (so log errors are easier on the eyes); * late update during a branch merge, to fix some latent issues that were missed;	3 years ago
Bryan Biedenkapp	ca161aa402	cleanup trailing whitespace;	3 years ago
K4YT3X	c487873db2	Reorganizing directory structure and minor housekeeping (#21) ... * reorganized files into appropriate directories * updated README, AUTHOR, and LICENSE to conform to conventions * adjusted CMakeLists and pipeline for the new directory structure * moved examples->configs; scripts->tools; src/debian->/debian * updated authors information * created new section in author information * removed deprecated iden_channel_calc tool	3 years ago