diff --git a/src/common/zlib/compress.c b/src/common/zlib/compress.c deleted file mode 100644 index b5a13089..00000000 --- a/src/common/zlib/compress.c +++ /dev/null @@ -1,76 +0,0 @@ -// SPDX-License-Identifier: Zlib -/* compress.c -- compress a memory buffer - * Copyright (C) 1995-2005, 2014, 2016 Jean-loup Gailly, Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* @(#) $Id$ */ - -#define ZLIB_INTERNAL -#include "zlib.h" - -/* =========================================================================== - Compresses the source buffer into the destination buffer. The level - parameter has the same meaning as in deflateInit. sourceLen is the byte - length of the source buffer. Upon entry, destLen is the total size of the - destination buffer, which must be at least 0.1% larger than sourceLen plus - 12 bytes. Upon exit, destLen is the actual size of the compressed buffer. - - compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_BUF_ERROR if there was not enough room in the output buffer, - Z_STREAM_ERROR if the level parameter is invalid. -*/ -int ZEXPORT compress2(Bytef *dest, uLongf *destLen, const Bytef *source, - uLong sourceLen, int level) { - z_stream stream; - int err; - const uInt max = (uInt)-1; - uLong left; - - left = *destLen; - *destLen = 0; - - stream.zalloc = (alloc_func)0; - stream.zfree = (free_func)0; - stream.opaque = (voidpf)0; - - err = deflateInit(&stream, level); - if (err != Z_OK) return err; - - stream.next_out = dest; - stream.avail_out = 0; - stream.next_in = (z_const Bytef *)source; - stream.avail_in = 0; - - do { - if (stream.avail_out == 0) { - stream.avail_out = left > (uLong)max ? max : (uInt)left; - left -= stream.avail_out; - } - if (stream.avail_in == 0) { - stream.avail_in = sourceLen > (uLong)max ? max : (uInt)sourceLen; - sourceLen -= stream.avail_in; - } - err = deflate(&stream, sourceLen ? Z_NO_FLUSH : Z_FINISH); - } while (err == Z_OK); - - *destLen = stream.total_out; - deflateEnd(&stream); - return err == Z_STREAM_END ? Z_OK : err; -} - -/* =========================================================================== - */ -int ZEXPORT compress(Bytef *dest, uLongf *destLen, const Bytef *source, - uLong sourceLen) { - return compress2(dest, destLen, source, sourceLen, Z_DEFAULT_COMPRESSION); -} - -/* =========================================================================== - If the default memLevel or windowBits for deflateInit() is changed, then - this function needs to be updated. - */ -uLong ZEXPORT compressBound(uLong sourceLen) { - return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) + - (sourceLen >> 25) + 13; -} diff --git a/src/common/zlib/deflate.c b/src/common/zlib/deflate.c index 3232078e..21bb33db 100644 --- a/src/common/zlib/deflate.c +++ b/src/common/zlib/deflate.c @@ -392,19 +392,11 @@ int ZEXPORT deflateInit2_(z_streamp strm, int level, int method, strm->msg = Z_NULL; if (strm->zalloc == (alloc_func)0) { -#ifdef Z_SOLO - return Z_STREAM_ERROR; -#else strm->zalloc = zcalloc; strm->opaque = (voidpf)0; -#endif } if (strm->zfree == (free_func)0) -#ifdef Z_SOLO - return Z_STREAM_ERROR; -#else strm->zfree = zcfree; -#endif #ifdef FASTEST if (level != 0) level = 1; diff --git a/src/common/zlib/gzclose.c b/src/common/zlib/gzclose.c deleted file mode 100644 index c1f88189..00000000 --- a/src/common/zlib/gzclose.c +++ /dev/null @@ -1,24 +0,0 @@ -// SPDX-License-Identifier: Zlib -/* gzclose.c -- zlib gzclose() function - * Copyright (C) 2004, 2010 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#include "gzguts.h" - -/* gzclose() is in a separate file so that it is linked in only if it is used. - That way the other gzclose functions can be used instead to avoid linking in - unneeded compression or decompression routines. */ -int ZEXPORT gzclose(gzFile file) { -#ifndef NO_GZCOMPRESS - gz_statep state; - - if (file == NULL) - return Z_STREAM_ERROR; - state = (gz_statep)file; - - return state->mode == GZ_READ ? gzclose_r(file) : gzclose_w(file); -#else - return gzclose_r(file); -#endif -} diff --git a/src/common/zlib/gzguts.h b/src/common/zlib/gzguts.h deleted file mode 100644 index e7d29496..00000000 --- a/src/common/zlib/gzguts.h +++ /dev/null @@ -1,215 +0,0 @@ -// SPDX-License-Identifier: Zlib -/* gzguts.h -- zlib internal header definitions for gz* operations - * Copyright (C) 2004-2024 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#ifdef _LARGEFILE64_SOURCE -# ifndef _LARGEFILE_SOURCE -# define _LARGEFILE_SOURCE 1 -# endif -# undef _FILE_OFFSET_BITS -# undef _TIME_BITS -#endif - -#ifdef HAVE_HIDDEN -# define ZLIB_INTERNAL __attribute__((visibility ("hidden"))) -#else -# define ZLIB_INTERNAL -#endif - -#include -#include "zlib.h" -#ifdef STDC -# include -# include -# include -#endif - -#ifndef _POSIX_SOURCE -# define _POSIX_SOURCE -#endif -#include - -#ifdef _WIN32 -# include -#endif - -#if defined(__TURBOC__) || defined(_MSC_VER) || defined(_WIN32) -# include -#endif - -#if defined(_WIN32) -# define WIDECHAR -#endif - -#ifdef WINAPI_FAMILY -# define open _open -# define read _read -# define write _write -# define close _close -#endif - -#ifdef NO_DEFLATE /* for compatibility with old definition */ -# define NO_GZCOMPRESS -#endif - -#if defined(STDC99) || (defined(__TURBOC__) && __TURBOC__ >= 0x550) -# ifndef HAVE_VSNPRINTF -# define HAVE_VSNPRINTF -# endif -#endif - -#if defined(__CYGWIN__) -# ifndef HAVE_VSNPRINTF -# define HAVE_VSNPRINTF -# endif -#endif - -#if defined(MSDOS) && defined(__BORLANDC__) && (BORLANDC > 0x410) -# ifndef HAVE_VSNPRINTF -# define HAVE_VSNPRINTF -# endif -#endif - -#ifndef HAVE_VSNPRINTF -# ifdef MSDOS -/* vsnprintf may exist on some MS-DOS compilers (DJGPP?), - but for now we just assume it doesn't. */ -# define NO_vsnprintf -# endif -# ifdef __TURBOC__ -# define NO_vsnprintf -# endif -# ifdef WIN32 -/* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */ -# if !defined(vsnprintf) && !defined(NO_vsnprintf) -# if !defined(_MSC_VER) || ( defined(_MSC_VER) && _MSC_VER < 1500 ) -# define vsnprintf _vsnprintf -# endif -# endif -# endif -# ifdef __SASC -# define NO_vsnprintf -# endif -# ifdef VMS -# define NO_vsnprintf -# endif -# ifdef __OS400__ -# define NO_vsnprintf -# endif -# ifdef __MVS__ -# define NO_vsnprintf -# endif -#endif - -/* unlike snprintf (which is required in C99), _snprintf does not guarantee - null termination of the result -- however this is only used in gzlib.c where - the result is assured to fit in the space provided */ -#if defined(_MSC_VER) && _MSC_VER < 1900 -# define snprintf _snprintf -#endif - -#ifndef local -# define local static -#endif -/* since "static" is used to mean two completely different things in C, we - define "local" for the non-static meaning of "static", for readability - (compile with -Dlocal if your debugger can't find static symbols) */ - -/* gz* functions always use library allocation functions */ -#ifndef STDC - extern voidp malloc(uInt size); - extern void free(voidpf ptr); -#endif - -/* get errno and strerror definition */ -#if defined UNDER_CE -# include -# define zstrerror() gz_strwinerror((DWORD)GetLastError()) -#else -# ifndef NO_STRERROR -# include -# define zstrerror() strerror(errno) -# else -# define zstrerror() "stdio error (consult errno)" -# endif -#endif - -/* provide prototypes for these when building zlib without LFS */ -#if !defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0 - ZEXTERN gzFile ZEXPORT gzopen64(const char *, const char *); - ZEXTERN z_off64_t ZEXPORT gzseek64(gzFile, z_off64_t, int); - ZEXTERN z_off64_t ZEXPORT gztell64(gzFile); - ZEXTERN z_off64_t ZEXPORT gzoffset64(gzFile); -#endif - -/* default memLevel */ -#if MAX_MEM_LEVEL >= 8 -# define DEF_MEM_LEVEL 8 -#else -# define DEF_MEM_LEVEL MAX_MEM_LEVEL -#endif - -/* default i/o buffer size -- double this for output when reading (this and - twice this must be able to fit in an unsigned type) */ -#define GZBUFSIZE 8192 - -/* gzip modes, also provide a little integrity check on the passed structure */ -#define GZ_NONE 0 -#define GZ_READ 7247 -#define GZ_WRITE 31153 -#define GZ_APPEND 1 /* mode set to GZ_WRITE after the file is opened */ - -/* values for gz_state how */ -#define LOOK 0 /* look for a gzip header */ -#define COPY 1 /* copy input directly */ -#define GZIP 2 /* decompress a gzip stream */ - -/* internal gzip file state data structure */ -typedef struct { - /* exposed contents for gzgetc() macro */ - struct gzFile_s x; /* "x" for exposed */ - /* x.have: number of bytes available at x.next */ - /* x.next: next output data to deliver or write */ - /* x.pos: current position in uncompressed data */ - /* used for both reading and writing */ - int mode; /* see gzip modes above */ - int fd; /* file descriptor */ - char *path; /* path or fd for error messages */ - unsigned size; /* buffer size, zero if not allocated yet */ - unsigned want; /* requested buffer size, default is GZBUFSIZE */ - unsigned char *in; /* input buffer (double-sized when writing) */ - unsigned char *out; /* output buffer (double-sized when reading) */ - int direct; /* 0 if processing gzip, 1 if transparent */ - /* just for reading */ - int how; /* 0: get header, 1: copy, 2: decompress */ - z_off64_t start; /* where the gzip data started, for rewinding */ - int eof; /* true if end of input file reached */ - int past; /* true if read requested past end */ - /* just for writing */ - int level; /* compression level */ - int strategy; /* compression strategy */ - int reset; /* true if a reset is pending after a Z_FINISH */ - /* seek request */ - z_off64_t skip; /* amount to skip (already rewound if backwards) */ - int seek; /* true if seek request pending */ - /* error information */ - int err; /* error code */ - char *msg; /* error message */ - /* zlib inflate or deflate stream */ - z_stream strm; /* stream structure in-place (not a pointer) */ -} gz_state; -typedef gz_state FAR *gz_statep; - -/* shared functions */ -void ZLIB_INTERNAL gz_error(gz_statep, int, const char *); -#if defined UNDER_CE -char ZLIB_INTERNAL *gz_strwinerror(DWORD error); -#endif - -/* GT_OFF(x), where x is an unsigned value, is true if x > maximum z_off64_t - value -- needed when comparing unsigned to z_off64_t, which is signed - (possible z_off64_t types off_t, off64_t, and long are all signed) */ -unsigned ZLIB_INTERNAL gz_intmax(void); -#define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > gz_intmax()) diff --git a/src/common/zlib/gzlib.c b/src/common/zlib/gzlib.c deleted file mode 100644 index 8265c479..00000000 --- a/src/common/zlib/gzlib.c +++ /dev/null @@ -1,583 +0,0 @@ -// SPDX-License-Identifier: Zlib -/* gzlib.c -- zlib functions common to reading and writing gzip files - * Copyright (C) 2004-2024 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#include "gzguts.h" - -#if defined(_WIN32) && !defined(__BORLANDC__) -# define LSEEK _lseeki64 -#else -#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0 -# define LSEEK lseek64 -#else -# define LSEEK lseek -#endif -#endif - -#if defined UNDER_CE - -/* Map the Windows error number in ERROR to a locale-dependent error message - string and return a pointer to it. Typically, the values for ERROR come - from GetLastError. - - The string pointed to shall not be modified by the application, but may be - overwritten by a subsequent call to gz_strwinerror - - The gz_strwinerror function does not change the current setting of - GetLastError. */ -char ZLIB_INTERNAL *gz_strwinerror(DWORD error) { - static char buf[1024]; - - wchar_t *msgbuf; - DWORD lasterr = GetLastError(); - DWORD chars = FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM - | FORMAT_MESSAGE_ALLOCATE_BUFFER, - NULL, - error, - 0, /* Default language */ - (LPVOID)&msgbuf, - 0, - NULL); - if (chars != 0) { - /* If there is an \r\n appended, zap it. */ - if (chars >= 2 - && msgbuf[chars - 2] == '\r' && msgbuf[chars - 1] == '\n') { - chars -= 2; - msgbuf[chars] = 0; - } - - if (chars > sizeof (buf) - 1) { - chars = sizeof (buf) - 1; - msgbuf[chars] = 0; - } - - wcstombs(buf, msgbuf, chars + 1); - LocalFree(msgbuf); - } - else { - sprintf(buf, "unknown win32 error (%ld)", error); - } - - SetLastError(lasterr); - return buf; -} - -#endif /* UNDER_CE */ - -/* Reset gzip file state */ -local void gz_reset(gz_statep state) { - state->x.have = 0; /* no output data available */ - if (state->mode == GZ_READ) { /* for reading ... */ - state->eof = 0; /* not at end of file */ - state->past = 0; /* have not read past end yet */ - state->how = LOOK; /* look for gzip header */ - } - else /* for writing ... */ - state->reset = 0; /* no deflateReset pending */ - state->seek = 0; /* no seek request pending */ - gz_error(state, Z_OK, NULL); /* clear error */ - state->x.pos = 0; /* no uncompressed data yet */ - state->strm.avail_in = 0; /* no input data yet */ -} - -/* Open a gzip file either by name or file descriptor. */ -local gzFile gz_open(const void *path, int fd, const char *mode) { - gz_statep state; - z_size_t len; - int oflag; -#ifdef O_CLOEXEC - int cloexec = 0; -#endif -#ifdef O_EXCL - int exclusive = 0; -#endif - - /* check input */ - if (path == NULL) - return NULL; - - /* allocate gzFile structure to return */ - state = (gz_statep)malloc(sizeof(gz_state)); - if (state == NULL) - return NULL; - state->size = 0; /* no buffers allocated yet */ - state->want = GZBUFSIZE; /* requested buffer size */ - state->msg = NULL; /* no error message yet */ - - /* interpret mode */ - state->mode = GZ_NONE; - state->level = Z_DEFAULT_COMPRESSION; - state->strategy = Z_DEFAULT_STRATEGY; - state->direct = 0; - while (*mode) { - if (*mode >= '0' && *mode <= '9') - state->level = *mode - '0'; - else - switch (*mode) { - case 'r': - state->mode = GZ_READ; - break; -#ifndef NO_GZCOMPRESS - case 'w': - state->mode = GZ_WRITE; - break; - case 'a': - state->mode = GZ_APPEND; - break; -#endif - case '+': /* can't read and write at the same time */ - free(state); - return NULL; - case 'b': /* ignore -- will request binary anyway */ - break; -#ifdef O_CLOEXEC - case 'e': - cloexec = 1; - break; -#endif -#ifdef O_EXCL - case 'x': - exclusive = 1; - break; -#endif - case 'f': - state->strategy = Z_FILTERED; - break; - case 'h': - state->strategy = Z_HUFFMAN_ONLY; - break; - case 'R': - state->strategy = Z_RLE; - break; - case 'F': - state->strategy = Z_FIXED; - break; - case 'T': - state->direct = 1; - break; - default: /* could consider as an error, but just ignore */ - ; - } - mode++; - } - - /* must provide an "r", "w", or "a" */ - if (state->mode == GZ_NONE) { - free(state); - return NULL; - } - - /* can't force transparent read */ - if (state->mode == GZ_READ) { - if (state->direct) { - free(state); - return NULL; - } - state->direct = 1; /* for empty file */ - } - - /* save the path name for error messages */ -#ifdef WIDECHAR - if (fd == -2) { - len = wcstombs(NULL, path, 0); - if (len == (z_size_t)-1) - len = 0; - } - else -#endif - len = strlen((const char *)path); - state->path = (char *)malloc(len + 1); - if (state->path == NULL) { - free(state); - return NULL; - } -#ifdef WIDECHAR - if (fd == -2) - if (len) - wcstombs(state->path, path, len + 1); - else - *(state->path) = 0; - else -#endif -#if !defined(NO_snprintf) && !defined(NO_vsnprintf) - (void)snprintf(state->path, len + 1, "%s", (const char *)path); -#else - strcpy(state->path, path); -#endif - - /* compute the flags for open() */ - oflag = -#ifdef O_LARGEFILE - O_LARGEFILE | -#endif -#ifdef O_BINARY - O_BINARY | -#endif -#ifdef O_CLOEXEC - (cloexec ? O_CLOEXEC : 0) | -#endif - (state->mode == GZ_READ ? - O_RDONLY : - (O_WRONLY | O_CREAT | -#ifdef O_EXCL - (exclusive ? O_EXCL : 0) | -#endif - (state->mode == GZ_WRITE ? - O_TRUNC : - O_APPEND))); - - /* open the file with the appropriate flags (or just use fd) */ - state->fd = fd > -1 ? fd : ( -#ifdef WIDECHAR - fd == -2 ? _wopen(path, oflag, 0666) : -#endif - open((const char *)path, oflag, 0666)); - if (state->fd == -1) { - free(state->path); - free(state); - return NULL; - } - if (state->mode == GZ_APPEND) { - LSEEK(state->fd, 0, SEEK_END); /* so gzoffset() is correct */ - state->mode = GZ_WRITE; /* simplify later checks */ - } - - /* save the current position for rewinding (only if reading) */ - if (state->mode == GZ_READ) { - state->start = LSEEK(state->fd, 0, SEEK_CUR); - if (state->start == -1) state->start = 0; - } - - /* initialize stream */ - gz_reset(state); - - /* return stream */ - return (gzFile)state; -} - -/* -- see zlib.h -- */ -gzFile ZEXPORT gzopen(const char *path, const char *mode) { - return gz_open(path, -1, mode); -} - -/* -- see zlib.h -- */ -gzFile ZEXPORT gzopen64(const char *path, const char *mode) { - return gz_open(path, -1, mode); -} - -/* -- see zlib.h -- */ -gzFile ZEXPORT gzdopen(int fd, const char *mode) { - char *path; /* identifier for error messages */ - gzFile gz; - - if (fd == -1 || (path = (char *)malloc(7 + 3 * sizeof(int))) == NULL) - return NULL; -#if !defined(NO_snprintf) && !defined(NO_vsnprintf) - (void)snprintf(path, 7 + 3 * sizeof(int), "", fd); -#else - sprintf(path, "", fd); /* for debugging */ -#endif - gz = gz_open(path, fd, mode); - free(path); - return gz; -} - -/* -- see zlib.h -- */ -#ifdef WIDECHAR -gzFile ZEXPORT gzopen_w(const wchar_t *path, const char *mode) { - return gz_open(path, -2, mode); -} -#endif - -/* -- see zlib.h -- */ -int ZEXPORT gzbuffer(gzFile file, unsigned size) { - gz_statep state; - - /* get internal structure and check integrity */ - if (file == NULL) - return -1; - state = (gz_statep)file; - if (state->mode != GZ_READ && state->mode != GZ_WRITE) - return -1; - - /* make sure we haven't already allocated memory */ - if (state->size != 0) - return -1; - - /* check and set requested size */ - if ((size << 1) < size) - return -1; /* need to be able to double it */ - if (size < 8) - size = 8; /* needed to behave well with flushing */ - state->want = size; - return 0; -} - -/* -- see zlib.h -- */ -int ZEXPORT gzrewind(gzFile file) { - gz_statep state; - - /* get internal structure */ - if (file == NULL) - return -1; - state = (gz_statep)file; - - /* check that we're reading and that there's no error */ - if (state->mode != GZ_READ || - (state->err != Z_OK && state->err != Z_BUF_ERROR)) - return -1; - - /* back up and start over */ - if (LSEEK(state->fd, state->start, SEEK_SET) == -1) - return -1; - gz_reset(state); - return 0; -} - -/* -- see zlib.h -- */ -z_off64_t ZEXPORT gzseek64(gzFile file, z_off64_t offset, int whence) { - unsigned n; - z_off64_t ret; - gz_statep state; - - /* get internal structure and check integrity */ - if (file == NULL) - return -1; - state = (gz_statep)file; - if (state->mode != GZ_READ && state->mode != GZ_WRITE) - return -1; - - /* check that there's no error */ - if (state->err != Z_OK && state->err != Z_BUF_ERROR) - return -1; - - /* can only seek from start or relative to current position */ - if (whence != SEEK_SET && whence != SEEK_CUR) - return -1; - - /* normalize offset to a SEEK_CUR specification */ - if (whence == SEEK_SET) - offset -= state->x.pos; - else if (state->seek) - offset += state->skip; - state->seek = 0; - - /* if within raw area while reading, just go there */ - if (state->mode == GZ_READ && state->how == COPY && - state->x.pos + offset >= 0) { - ret = LSEEK(state->fd, offset - (z_off64_t)state->x.have, SEEK_CUR); - if (ret == -1) - return -1; - state->x.have = 0; - state->eof = 0; - state->past = 0; - state->seek = 0; - gz_error(state, Z_OK, NULL); - state->strm.avail_in = 0; - state->x.pos += offset; - return state->x.pos; - } - - /* calculate skip amount, rewinding if needed for back seek when reading */ - if (offset < 0) { - if (state->mode != GZ_READ) /* writing -- can't go backwards */ - return -1; - offset += state->x.pos; - if (offset < 0) /* before start of file! */ - return -1; - if (gzrewind(file) == -1) /* rewind, then skip to offset */ - return -1; - } - - /* if reading, skip what's in output buffer (one less gzgetc() check) */ - if (state->mode == GZ_READ) { - n = GT_OFF(state->x.have) || (z_off64_t)state->x.have > offset ? - (unsigned)offset : state->x.have; - state->x.have -= n; - state->x.next += n; - state->x.pos += n; - offset -= n; - } - - /* request skip (if not zero) */ - if (offset) { - state->seek = 1; - state->skip = offset; - } - return state->x.pos + offset; -} - -/* -- see zlib.h -- */ -z_off_t ZEXPORT gzseek(gzFile file, z_off_t offset, int whence) { - z_off64_t ret; - - ret = gzseek64(file, (z_off64_t)offset, whence); - return ret == (z_off_t)ret ? (z_off_t)ret : -1; -} - -/* -- see zlib.h -- */ -z_off64_t ZEXPORT gztell64(gzFile file) { - gz_statep state; - - /* get internal structure and check integrity */ - if (file == NULL) - return -1; - state = (gz_statep)file; - if (state->mode != GZ_READ && state->mode != GZ_WRITE) - return -1; - - /* return position */ - return state->x.pos + (state->seek ? state->skip : 0); -} - -/* -- see zlib.h -- */ -z_off_t ZEXPORT gztell(gzFile file) { - z_off64_t ret; - - ret = gztell64(file); - return ret == (z_off_t)ret ? (z_off_t)ret : -1; -} - -/* -- see zlib.h -- */ -z_off64_t ZEXPORT gzoffset64(gzFile file) { - z_off64_t offset; - gz_statep state; - - /* get internal structure and check integrity */ - if (file == NULL) - return -1; - state = (gz_statep)file; - if (state->mode != GZ_READ && state->mode != GZ_WRITE) - return -1; - - /* compute and return effective offset in file */ - offset = LSEEK(state->fd, 0, SEEK_CUR); - if (offset == -1) - return -1; - if (state->mode == GZ_READ) /* reading */ - offset -= state->strm.avail_in; /* don't count buffered input */ - return offset; -} - -/* -- see zlib.h -- */ -z_off_t ZEXPORT gzoffset(gzFile file) { - z_off64_t ret; - - ret = gzoffset64(file); - return ret == (z_off_t)ret ? (z_off_t)ret : -1; -} - -/* -- see zlib.h -- */ -int ZEXPORT gzeof(gzFile file) { - gz_statep state; - - /* get internal structure and check integrity */ - if (file == NULL) - return 0; - state = (gz_statep)file; - if (state->mode != GZ_READ && state->mode != GZ_WRITE) - return 0; - - /* return end-of-file state */ - return state->mode == GZ_READ ? state->past : 0; -} - -/* -- see zlib.h -- */ -const char * ZEXPORT gzerror(gzFile file, int *errnum) { - gz_statep state; - - /* get internal structure and check integrity */ - if (file == NULL) - return NULL; - state = (gz_statep)file; - if (state->mode != GZ_READ && state->mode != GZ_WRITE) - return NULL; - - /* return error information */ - if (errnum != NULL) - *errnum = state->err; - return state->err == Z_MEM_ERROR ? "out of memory" : - (state->msg == NULL ? "" : state->msg); -} - -/* -- see zlib.h -- */ -void ZEXPORT gzclearerr(gzFile file) { - gz_statep state; - - /* get internal structure and check integrity */ - if (file == NULL) - return; - state = (gz_statep)file; - if (state->mode != GZ_READ && state->mode != GZ_WRITE) - return; - - /* clear error and end-of-file */ - if (state->mode == GZ_READ) { - state->eof = 0; - state->past = 0; - } - gz_error(state, Z_OK, NULL); -} - -/* Create an error message in allocated memory and set state->err and - state->msg accordingly. Free any previous error message already there. Do - not try to free or allocate space if the error is Z_MEM_ERROR (out of - memory). Simply save the error message as a static string. If there is an - allocation failure constructing the error message, then convert the error to - out of memory. */ -void ZLIB_INTERNAL gz_error(gz_statep state, int err, const char *msg) { - /* free previously allocated message and clear */ - if (state->msg != NULL) { - if (state->err != Z_MEM_ERROR) - free(state->msg); - state->msg = NULL; - } - - /* if fatal, set state->x.have to 0 so that the gzgetc() macro fails */ - if (err != Z_OK && err != Z_BUF_ERROR) - state->x.have = 0; - - /* set error code, and if no message, then done */ - state->err = err; - if (msg == NULL) - return; - - /* for an out of memory error, return literal string when requested */ - if (err == Z_MEM_ERROR) - return; - - /* construct error message with path */ - if ((state->msg = (char *)malloc(strlen(state->path) + strlen(msg) + 3)) == - NULL) { - state->err = Z_MEM_ERROR; - return; - } -#if !defined(NO_snprintf) && !defined(NO_vsnprintf) - (void)snprintf(state->msg, strlen(state->path) + strlen(msg) + 3, - "%s%s%s", state->path, ": ", msg); -#else - strcpy(state->msg, state->path); - strcat(state->msg, ": "); - strcat(state->msg, msg); -#endif -} - -/* portably return maximum value for an int (when limits.h presumed not - available) -- we need to do this to cover cases where 2's complement not - used, since C standard permits 1's complement and sign-bit representations, - otherwise we could just use ((unsigned)-1) >> 1 */ -unsigned ZLIB_INTERNAL gz_intmax(void) { -#ifdef INT_MAX - return INT_MAX; -#else - unsigned p = 1, q; - do { - q = p; - p <<= 1; - p++; - } while (p > q); - return q >> 1; -#endif -} diff --git a/src/common/zlib/gzread.c b/src/common/zlib/gzread.c deleted file mode 100644 index 8191f6be..00000000 --- a/src/common/zlib/gzread.c +++ /dev/null @@ -1,603 +0,0 @@ -// SPDX-License-Identifier: Zlib -/* gzread.c -- zlib functions for reading gzip files - * Copyright (C) 2004-2017 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#include "gzguts.h" - -/* Use read() to load a buffer -- return -1 on error, otherwise 0. Read from - state->fd, and update state->eof, state->err, and state->msg as appropriate. - This function needs to loop on read(), since read() is not guaranteed to - read the number of bytes requested, depending on the type of descriptor. */ -local int gz_load(gz_statep state, unsigned char *buf, unsigned len, - unsigned *have) { - int ret; - unsigned get, max = ((unsigned)-1 >> 2) + 1; - - *have = 0; - do { - get = len - *have; - if (get > max) - get = max; - ret = read(state->fd, buf + *have, get); - if (ret <= 0) - break; - *have += (unsigned)ret; - } while (*have < len); - if (ret < 0) { - gz_error(state, Z_ERRNO, zstrerror()); - return -1; - } - if (ret == 0) - state->eof = 1; - return 0; -} - -/* Load up input buffer and set eof flag if last data loaded -- return -1 on - error, 0 otherwise. Note that the eof flag is set when the end of the input - file is reached, even though there may be unused data in the buffer. Once - that data has been used, no more attempts will be made to read the file. - If strm->avail_in != 0, then the current data is moved to the beginning of - the input buffer, and then the remainder of the buffer is loaded with the - available data from the input file. */ -local int gz_avail(gz_statep state) { - unsigned got; - z_streamp strm = &(state->strm); - - if (state->err != Z_OK && state->err != Z_BUF_ERROR) - return -1; - if (state->eof == 0) { - if (strm->avail_in) { /* copy what's there to the start */ - unsigned char *p = state->in; - unsigned const char *q = strm->next_in; - unsigned n = strm->avail_in; - do { - *p++ = *q++; - } while (--n); - } - if (gz_load(state, state->in + strm->avail_in, - state->size - strm->avail_in, &got) == -1) - return -1; - strm->avail_in += got; - strm->next_in = state->in; - } - return 0; -} - -/* Look for gzip header, set up for inflate or copy. state->x.have must be 0. - If this is the first time in, allocate required memory. state->how will be - left unchanged if there is no more input data available, will be set to COPY - if there is no gzip header and direct copying will be performed, or it will - be set to GZIP for decompression. If direct copying, then leftover input - data from the input buffer will be copied to the output buffer. In that - case, all further file reads will be directly to either the output buffer or - a user buffer. If decompressing, the inflate state will be initialized. - gz_look() will return 0 on success or -1 on failure. */ -local int gz_look(gz_statep state) { - z_streamp strm = &(state->strm); - - /* allocate read buffers and inflate memory */ - if (state->size == 0) { - /* allocate buffers */ - state->in = (unsigned char *)malloc(state->want); - state->out = (unsigned char *)malloc(state->want << 1); - if (state->in == NULL || state->out == NULL) { - free(state->out); - free(state->in); - gz_error(state, Z_MEM_ERROR, "out of memory"); - return -1; - } - state->size = state->want; - - /* allocate inflate memory */ - state->strm.zalloc = Z_NULL; - state->strm.zfree = Z_NULL; - state->strm.opaque = Z_NULL; - state->strm.avail_in = 0; - state->strm.next_in = Z_NULL; - if (inflateInit2(&(state->strm), 15 + 16) != Z_OK) { /* gunzip */ - free(state->out); - free(state->in); - state->size = 0; - gz_error(state, Z_MEM_ERROR, "out of memory"); - return -1; - } - } - - /* get at least the magic bytes in the input buffer */ - if (strm->avail_in < 2) { - if (gz_avail(state) == -1) - return -1; - if (strm->avail_in == 0) - return 0; - } - - /* look for gzip magic bytes -- if there, do gzip decoding (note: there is - a logical dilemma here when considering the case of a partially written - gzip file, to wit, if a single 31 byte is written, then we cannot tell - whether this is a single-byte file, or just a partially written gzip - file -- for here we assume that if a gzip file is being written, then - the header will be written in a single operation, so that reading a - single byte is sufficient indication that it is not a gzip file) */ - if (strm->avail_in > 1 && - strm->next_in[0] == 31 && strm->next_in[1] == 139) { - inflateReset(strm); - state->how = GZIP; - state->direct = 0; - return 0; - } - - /* no gzip header -- if we were decoding gzip before, then this is trailing - garbage. Ignore the trailing garbage and finish. */ - if (state->direct == 0) { - strm->avail_in = 0; - state->eof = 1; - state->x.have = 0; - return 0; - } - - /* doing raw i/o, copy any leftover input to output -- this assumes that - the output buffer is larger than the input buffer, which also assures - space for gzungetc() */ - state->x.next = state->out; - memcpy(state->x.next, strm->next_in, strm->avail_in); - state->x.have = strm->avail_in; - strm->avail_in = 0; - state->how = COPY; - state->direct = 1; - return 0; -} - -/* Decompress from input to the provided next_out and avail_out in the state. - On return, state->x.have and state->x.next point to the just decompressed - data. If the gzip stream completes, state->how is reset to LOOK to look for - the next gzip stream or raw data, once state->x.have is depleted. Returns 0 - on success, -1 on failure. */ -local int gz_decomp(gz_statep state) { - int ret = Z_OK; - unsigned had; - z_streamp strm = &(state->strm); - - /* fill output buffer up to end of deflate stream */ - had = strm->avail_out; - do { - /* get more input for inflate() */ - if (strm->avail_in == 0 && gz_avail(state) == -1) - return -1; - if (strm->avail_in == 0) { - gz_error(state, Z_BUF_ERROR, "unexpected end of file"); - break; - } - - /* decompress and handle errors */ - ret = inflate(strm, Z_NO_FLUSH); - if (ret == Z_STREAM_ERROR || ret == Z_NEED_DICT) { - gz_error(state, Z_STREAM_ERROR, - "internal error: inflate stream corrupt"); - return -1; - } - if (ret == Z_MEM_ERROR) { - gz_error(state, Z_MEM_ERROR, "out of memory"); - return -1; - } - if (ret == Z_DATA_ERROR) { /* deflate stream invalid */ - gz_error(state, Z_DATA_ERROR, - strm->msg == NULL ? "compressed data error" : strm->msg); - return -1; - } - } while (strm->avail_out && ret != Z_STREAM_END); - - /* update available output */ - state->x.have = had - strm->avail_out; - state->x.next = strm->next_out - state->x.have; - - /* if the gzip stream completed successfully, look for another */ - if (ret == Z_STREAM_END) - state->how = LOOK; - - /* good decompression */ - return 0; -} - -/* Fetch data and put it in the output buffer. Assumes state->x.have is 0. - Data is either copied from the input file or decompressed from the input - file depending on state->how. If state->how is LOOK, then a gzip header is - looked for to determine whether to copy or decompress. Returns -1 on error, - otherwise 0. gz_fetch() will leave state->how as COPY or GZIP unless the - end of the input file has been reached and all data has been processed. */ -local int gz_fetch(gz_statep state) { - z_streamp strm = &(state->strm); - - do { - switch(state->how) { - case LOOK: /* -> LOOK, COPY (only if never GZIP), or GZIP */ - if (gz_look(state) == -1) - return -1; - if (state->how == LOOK) - return 0; - break; - case COPY: /* -> COPY */ - if (gz_load(state, state->out, state->size << 1, &(state->x.have)) - == -1) - return -1; - state->x.next = state->out; - return 0; - case GZIP: /* -> GZIP or LOOK (if end of gzip stream) */ - strm->avail_out = state->size << 1; - strm->next_out = state->out; - if (gz_decomp(state) == -1) - return -1; - } - } while (state->x.have == 0 && (!state->eof || strm->avail_in)); - return 0; -} - -/* Skip len uncompressed bytes of output. Return -1 on error, 0 on success. */ -local int gz_skip(gz_statep state, z_off64_t len) { - unsigned n; - - /* skip over len bytes or reach end-of-file, whichever comes first */ - while (len) - /* skip over whatever is in output buffer */ - if (state->x.have) { - n = GT_OFF(state->x.have) || (z_off64_t)state->x.have > len ? - (unsigned)len : state->x.have; - state->x.have -= n; - state->x.next += n; - state->x.pos += n; - len -= n; - } - - /* output buffer empty -- return if we're at the end of the input */ - else if (state->eof && state->strm.avail_in == 0) - break; - - /* need more data to skip -- load up output buffer */ - else { - /* get more output, looking for header if required */ - if (gz_fetch(state) == -1) - return -1; - } - return 0; -} - -/* Read len bytes into buf from file, or less than len up to the end of the - input. Return the number of bytes read. If zero is returned, either the - end of file was reached, or there was an error. state->err must be - consulted in that case to determine which. */ -local z_size_t gz_read(gz_statep state, voidp buf, z_size_t len) { - z_size_t got; - unsigned n; - - /* if len is zero, avoid unnecessary operations */ - if (len == 0) - return 0; - - /* process a skip request */ - if (state->seek) { - state->seek = 0; - if (gz_skip(state, state->skip) == -1) - return 0; - } - - /* get len bytes to buf, or less than len if at the end */ - got = 0; - do { - /* set n to the maximum amount of len that fits in an unsigned int */ - n = (unsigned)-1; - if (n > len) - n = (unsigned)len; - - /* first just try copying data from the output buffer */ - if (state->x.have) { - if (state->x.have < n) - n = state->x.have; - memcpy(buf, state->x.next, n); - state->x.next += n; - state->x.have -= n; - } - - /* output buffer empty -- return if we're at the end of the input */ - else if (state->eof && state->strm.avail_in == 0) { - state->past = 1; /* tried to read past end */ - break; - } - - /* need output data -- for small len or new stream load up our output - buffer */ - else if (state->how == LOOK || n < (state->size << 1)) { - /* get more output, looking for header if required */ - if (gz_fetch(state) == -1) - return 0; - continue; /* no progress yet -- go back to copy above */ - /* the copy above assures that we will leave with space in the - output buffer, allowing at least one gzungetc() to succeed */ - } - - /* large len -- read directly into user buffer */ - else if (state->how == COPY) { /* read directly */ - if (gz_load(state, (unsigned char *)buf, n, &n) == -1) - return 0; - } - - /* large len -- decompress directly into user buffer */ - else { /* state->how == GZIP */ - state->strm.avail_out = n; - state->strm.next_out = (unsigned char *)buf; - if (gz_decomp(state) == -1) - return 0; - n = state->x.have; - state->x.have = 0; - } - - /* update progress */ - len -= n; - buf = (char *)buf + n; - got += n; - state->x.pos += n; - } while (len); - - /* return number of bytes read into user buffer */ - return got; -} - -/* -- see zlib.h -- */ -int ZEXPORT gzread(gzFile file, voidp buf, unsigned len) { - gz_statep state; - - /* get internal structure */ - if (file == NULL) - return -1; - state = (gz_statep)file; - - /* check that we're reading and that there's no (serious) error */ - if (state->mode != GZ_READ || - (state->err != Z_OK && state->err != Z_BUF_ERROR)) - return -1; - - /* since an int is returned, make sure len fits in one, otherwise return - with an error (this avoids a flaw in the interface) */ - if ((int)len < 0) { - gz_error(state, Z_STREAM_ERROR, "request does not fit in an int"); - return -1; - } - - /* read len or fewer bytes to buf */ - len = (unsigned)gz_read(state, buf, len); - - /* check for an error */ - if (len == 0 && state->err != Z_OK && state->err != Z_BUF_ERROR) - return -1; - - /* return the number of bytes read (this is assured to fit in an int) */ - return (int)len; -} - -/* -- see zlib.h -- */ -z_size_t ZEXPORT gzfread(voidp buf, z_size_t size, z_size_t nitems, gzFile file) { - z_size_t len; - gz_statep state; - - /* get internal structure */ - if (file == NULL) - return 0; - state = (gz_statep)file; - - /* check that we're reading and that there's no (serious) error */ - if (state->mode != GZ_READ || - (state->err != Z_OK && state->err != Z_BUF_ERROR)) - return 0; - - /* compute bytes to read -- error on overflow */ - len = nitems * size; - if (size && len / size != nitems) { - gz_error(state, Z_STREAM_ERROR, "request does not fit in a size_t"); - return 0; - } - - /* read len or fewer bytes to buf, return the number of full items read */ - return len ? gz_read(state, buf, len) / size : 0; -} - -/* -- see zlib.h -- */ -#ifdef Z_PREFIX_SET -# undef z_gzgetc -#else -# undef gzgetc -#endif -int ZEXPORT gzgetc(gzFile file) { - unsigned char buf[1]; - gz_statep state; - - /* get internal structure */ - if (file == NULL) - return -1; - state = (gz_statep)file; - - /* check that we're reading and that there's no (serious) error */ - if (state->mode != GZ_READ || - (state->err != Z_OK && state->err != Z_BUF_ERROR)) - return -1; - - /* try output buffer (no need to check for skip request) */ - if (state->x.have) { - state->x.have--; - state->x.pos++; - return *(state->x.next)++; - } - - /* nothing there -- try gz_read() */ - return gz_read(state, buf, 1) < 1 ? -1 : buf[0]; -} - -int ZEXPORT gzgetc_(gzFile file) { - return gzgetc(file); -} - -/* -- see zlib.h -- */ -int ZEXPORT gzungetc(int c, gzFile file) { - gz_statep state; - - /* get internal structure */ - if (file == NULL) - return -1; - state = (gz_statep)file; - - /* in case this was just opened, set up the input buffer */ - if (state->mode == GZ_READ && state->how == LOOK && state->x.have == 0) - (void)gz_look(state); - - /* check that we're reading and that there's no (serious) error */ - if (state->mode != GZ_READ || - (state->err != Z_OK && state->err != Z_BUF_ERROR)) - return -1; - - /* process a skip request */ - if (state->seek) { - state->seek = 0; - if (gz_skip(state, state->skip) == -1) - return -1; - } - - /* can't push EOF */ - if (c < 0) - return -1; - - /* if output buffer empty, put byte at end (allows more pushing) */ - if (state->x.have == 0) { - state->x.have = 1; - state->x.next = state->out + (state->size << 1) - 1; - state->x.next[0] = (unsigned char)c; - state->x.pos--; - state->past = 0; - return c; - } - - /* if no room, give up (must have already done a gzungetc()) */ - if (state->x.have == (state->size << 1)) { - gz_error(state, Z_DATA_ERROR, "out of room to push characters"); - return -1; - } - - /* slide output data if needed and insert byte before existing data */ - if (state->x.next == state->out) { - unsigned char *src = state->out + state->x.have; - unsigned char *dest = state->out + (state->size << 1); - while (src > state->out) - *--dest = *--src; - state->x.next = dest; - } - state->x.have++; - state->x.next--; - state->x.next[0] = (unsigned char)c; - state->x.pos--; - state->past = 0; - return c; -} - -/* -- see zlib.h -- */ -char * ZEXPORT gzgets(gzFile file, char *buf, int len) { - unsigned left, n; - char *str; - unsigned char *eol; - gz_statep state; - - /* check parameters and get internal structure */ - if (file == NULL || buf == NULL || len < 1) - return NULL; - state = (gz_statep)file; - - /* check that we're reading and that there's no (serious) error */ - if (state->mode != GZ_READ || - (state->err != Z_OK && state->err != Z_BUF_ERROR)) - return NULL; - - /* process a skip request */ - if (state->seek) { - state->seek = 0; - if (gz_skip(state, state->skip) == -1) - return NULL; - } - - /* copy output bytes up to new line or len - 1, whichever comes first -- - append a terminating zero to the string (we don't check for a zero in - the contents, let the user worry about that) */ - str = buf; - left = (unsigned)len - 1; - if (left) do { - /* assure that something is in the output buffer */ - if (state->x.have == 0 && gz_fetch(state) == -1) - return NULL; /* error */ - if (state->x.have == 0) { /* end of file */ - state->past = 1; /* read past end */ - break; /* return what we have */ - } - - /* look for end-of-line in current output buffer */ - n = state->x.have > left ? left : state->x.have; - eol = (unsigned char *)memchr(state->x.next, '\n', n); - if (eol != NULL) - n = (unsigned)(eol - state->x.next) + 1; - - /* copy through end-of-line, or remainder if not found */ - memcpy(buf, state->x.next, n); - state->x.have -= n; - state->x.next += n; - state->x.pos += n; - left -= n; - buf += n; - } while (left && eol == NULL); - - /* return terminated string, or if nothing, end of file */ - if (buf == str) - return NULL; - buf[0] = 0; - return str; -} - -/* -- see zlib.h -- */ -int ZEXPORT gzdirect(gzFile file) { - gz_statep state; - - /* get internal structure */ - if (file == NULL) - return 0; - state = (gz_statep)file; - - /* if the state is not known, but we can find out, then do so (this is - mainly for right after a gzopen() or gzdopen()) */ - if (state->mode == GZ_READ && state->how == LOOK && state->x.have == 0) - (void)gz_look(state); - - /* return 1 if transparent, 0 if processing a gzip stream */ - return state->direct; -} - -/* -- see zlib.h -- */ -int ZEXPORT gzclose_r(gzFile file) { - int ret, err; - gz_statep state; - - /* get internal structure */ - if (file == NULL) - return Z_STREAM_ERROR; - state = (gz_statep)file; - - /* check that we're reading */ - if (state->mode != GZ_READ) - return Z_STREAM_ERROR; - - /* free memory and close file */ - if (state->size) { - inflateEnd(&(state->strm)); - free(state->out); - free(state->in); - } - err = state->err == Z_BUF_ERROR ? Z_BUF_ERROR : Z_OK; - gz_error(state, Z_OK, NULL); - free(state->path); - ret = close(state->fd); - free(state); - return ret ? Z_ERRNO : err; -} diff --git a/src/common/zlib/gzwrite.c b/src/common/zlib/gzwrite.c deleted file mode 100644 index 2cf1d798..00000000 --- a/src/common/zlib/gzwrite.c +++ /dev/null @@ -1,632 +0,0 @@ -// SPDX-License-Identifier: Zlib -/* gzwrite.c -- zlib functions for writing gzip files - * Copyright (C) 2004-2019 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#include "gzguts.h" - -/* Initialize state for writing a gzip file. Mark initialization by setting - state->size to non-zero. Return -1 on a memory allocation failure, or 0 on - success. */ -local int gz_init(gz_statep state) { - int ret; - z_streamp strm = &(state->strm); - - /* allocate input buffer (double size for gzprintf) */ - state->in = (unsigned char *)malloc(state->want << 1); - if (state->in == NULL) { - gz_error(state, Z_MEM_ERROR, "out of memory"); - return -1; - } - - /* only need output buffer and deflate state if compressing */ - if (!state->direct) { - /* allocate output buffer */ - state->out = (unsigned char *)malloc(state->want); - if (state->out == NULL) { - free(state->in); - gz_error(state, Z_MEM_ERROR, "out of memory"); - return -1; - } - - /* allocate deflate memory, set up for gzip compression */ - strm->zalloc = Z_NULL; - strm->zfree = Z_NULL; - strm->opaque = Z_NULL; - ret = deflateInit2(strm, state->level, Z_DEFLATED, - MAX_WBITS + 16, DEF_MEM_LEVEL, state->strategy); - if (ret != Z_OK) { - free(state->out); - free(state->in); - gz_error(state, Z_MEM_ERROR, "out of memory"); - return -1; - } - strm->next_in = NULL; - } - - /* mark state as initialized */ - state->size = state->want; - - /* initialize write buffer if compressing */ - if (!state->direct) { - strm->avail_out = state->size; - strm->next_out = state->out; - state->x.next = strm->next_out; - } - return 0; -} - -/* Compress whatever is at avail_in and next_in and write to the output file. - Return -1 if there is an error writing to the output file or if gz_init() - fails to allocate memory, otherwise 0. flush is assumed to be a valid - deflate() flush value. If flush is Z_FINISH, then the deflate() state is - reset to start a new gzip stream. If gz->direct is true, then simply write - to the output file without compressing, and ignore flush. */ -local int gz_comp(gz_statep state, int flush) { - int ret, writ; - unsigned have, put, max = ((unsigned)-1 >> 2) + 1; - z_streamp strm = &(state->strm); - - /* allocate memory if this is the first time through */ - if (state->size == 0 && gz_init(state) == -1) - return -1; - - /* write directly if requested */ - if (state->direct) { - while (strm->avail_in) { - put = strm->avail_in > max ? max : strm->avail_in; - writ = write(state->fd, strm->next_in, put); - if (writ < 0) { - gz_error(state, Z_ERRNO, zstrerror()); - return -1; - } - strm->avail_in -= (unsigned)writ; - strm->next_in += writ; - } - return 0; - } - - /* check for a pending reset */ - if (state->reset) { - /* don't start a new gzip member unless there is data to write */ - if (strm->avail_in == 0) - return 0; - deflateReset(strm); - state->reset = 0; - } - - /* run deflate() on provided input until it produces no more output */ - ret = Z_OK; - do { - /* write out current buffer contents if full, or if flushing, but if - doing Z_FINISH then don't write until we get to Z_STREAM_END */ - if (strm->avail_out == 0 || (flush != Z_NO_FLUSH && - (flush != Z_FINISH || ret == Z_STREAM_END))) { - while (strm->next_out > state->x.next) { - put = strm->next_out - state->x.next > (int)max ? max : - (unsigned)(strm->next_out - state->x.next); - writ = write(state->fd, state->x.next, put); - if (writ < 0) { - gz_error(state, Z_ERRNO, zstrerror()); - return -1; - } - state->x.next += writ; - } - if (strm->avail_out == 0) { - strm->avail_out = state->size; - strm->next_out = state->out; - state->x.next = state->out; - } - } - - /* compress */ - have = strm->avail_out; - ret = deflate(strm, flush); - if (ret == Z_STREAM_ERROR) { - gz_error(state, Z_STREAM_ERROR, - "internal error: deflate stream corrupt"); - return -1; - } - have -= strm->avail_out; - } while (have); - - /* if that completed a deflate stream, allow another to start */ - if (flush == Z_FINISH) - state->reset = 1; - - /* all done, no errors */ - return 0; -} - -/* Compress len zeros to output. Return -1 on a write error or memory - allocation failure by gz_comp(), or 0 on success. */ -local int gz_zero(gz_statep state, z_off64_t len) { - int first; - unsigned n; - z_streamp strm = &(state->strm); - - /* consume whatever's left in the input buffer */ - if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1) - return -1; - - /* compress len zeros (len guaranteed > 0) */ - first = 1; - while (len) { - n = GT_OFF(state->size) || (z_off64_t)state->size > len ? - (unsigned)len : state->size; - if (first) { - memset(state->in, 0, n); - first = 0; - } - strm->avail_in = n; - strm->next_in = state->in; - state->x.pos += n; - if (gz_comp(state, Z_NO_FLUSH) == -1) - return -1; - len -= n; - } - return 0; -} - -/* Write len bytes from buf to file. Return the number of bytes written. If - the returned value is less than len, then there was an error. */ -local z_size_t gz_write(gz_statep state, voidpc buf, z_size_t len) { - z_size_t put = len; - - /* if len is zero, avoid unnecessary operations */ - if (len == 0) - return 0; - - /* allocate memory if this is the first time through */ - if (state->size == 0 && gz_init(state) == -1) - return 0; - - /* check for seek request */ - if (state->seek) { - state->seek = 0; - if (gz_zero(state, state->skip) == -1) - return 0; - } - - /* for small len, copy to input buffer, otherwise compress directly */ - if (len < state->size) { - /* copy to input buffer, compress when full */ - do { - unsigned have, copy; - - if (state->strm.avail_in == 0) - state->strm.next_in = state->in; - have = (unsigned)((state->strm.next_in + state->strm.avail_in) - - state->in); - copy = state->size - have; - if (copy > len) - copy = (unsigned)len; - memcpy(state->in + have, buf, copy); - state->strm.avail_in += copy; - state->x.pos += copy; - buf = (const char *)buf + copy; - len -= copy; - if (len && gz_comp(state, Z_NO_FLUSH) == -1) - return 0; - } while (len); - } - else { - /* consume whatever's left in the input buffer */ - if (state->strm.avail_in && gz_comp(state, Z_NO_FLUSH) == -1) - return 0; - - /* directly compress user buffer to file */ - state->strm.next_in = (z_const Bytef *)buf; - do { - unsigned n = (unsigned)-1; - if (n > len) - n = (unsigned)len; - state->strm.avail_in = n; - state->x.pos += n; - if (gz_comp(state, Z_NO_FLUSH) == -1) - return 0; - len -= n; - } while (len); - } - - /* input was all buffered or compressed */ - return put; -} - -/* -- see zlib.h -- */ -int ZEXPORT gzwrite(gzFile file, voidpc buf, unsigned len) { - gz_statep state; - - /* get internal structure */ - if (file == NULL) - return 0; - state = (gz_statep)file; - - /* check that we're writing and that there's no error */ - if (state->mode != GZ_WRITE || state->err != Z_OK) - return 0; - - /* since an int is returned, make sure len fits in one, otherwise return - with an error (this avoids a flaw in the interface) */ - if ((int)len < 0) { - gz_error(state, Z_DATA_ERROR, "requested length does not fit in int"); - return 0; - } - - /* write len bytes from buf (the return value will fit in an int) */ - return (int)gz_write(state, buf, len); -} - -/* -- see zlib.h -- */ -z_size_t ZEXPORT gzfwrite(voidpc buf, z_size_t size, z_size_t nitems, - gzFile file) { - z_size_t len; - gz_statep state; - - /* get internal structure */ - if (file == NULL) - return 0; - state = (gz_statep)file; - - /* check that we're writing and that there's no error */ - if (state->mode != GZ_WRITE || state->err != Z_OK) - return 0; - - /* compute bytes to read -- error on overflow */ - len = nitems * size; - if (size && len / size != nitems) { - gz_error(state, Z_STREAM_ERROR, "request does not fit in a size_t"); - return 0; - } - - /* write len bytes to buf, return the number of full items written */ - return len ? gz_write(state, buf, len) / size : 0; -} - -/* -- see zlib.h -- */ -int ZEXPORT gzputc(gzFile file, int c) { - unsigned have; - unsigned char buf[1]; - gz_statep state; - z_streamp strm; - - /* get internal structure */ - if (file == NULL) - return -1; - state = (gz_statep)file; - strm = &(state->strm); - - /* check that we're writing and that there's no error */ - if (state->mode != GZ_WRITE || state->err != Z_OK) - return -1; - - /* check for seek request */ - if (state->seek) { - state->seek = 0; - if (gz_zero(state, state->skip) == -1) - return -1; - } - - /* try writing to input buffer for speed (state->size == 0 if buffer not - initialized) */ - if (state->size) { - if (strm->avail_in == 0) - strm->next_in = state->in; - have = (unsigned)((strm->next_in + strm->avail_in) - state->in); - if (have < state->size) { - state->in[have] = (unsigned char)c; - strm->avail_in++; - state->x.pos++; - return c & 0xff; - } - } - - /* no room in buffer or not initialized, use gz_write() */ - buf[0] = (unsigned char)c; - if (gz_write(state, buf, 1) != 1) - return -1; - return c & 0xff; -} - -/* -- see zlib.h -- */ -int ZEXPORT gzputs(gzFile file, const char *s) { - z_size_t len, put; - gz_statep state; - - /* get internal structure */ - if (file == NULL) - return -1; - state = (gz_statep)file; - - /* check that we're writing and that there's no error */ - if (state->mode != GZ_WRITE || state->err != Z_OK) - return -1; - - /* write string */ - len = strlen(s); - if ((int)len < 0 || (unsigned)len != len) { - gz_error(state, Z_STREAM_ERROR, "string length does not fit in int"); - return -1; - } - put = gz_write(state, s, len); - return put < len ? -1 : (int)len; -} - -#if defined(STDC) || defined(Z_HAVE_STDARG_H) -#include - -/* -- see zlib.h -- */ -int ZEXPORTVA gzvprintf(gzFile file, const char *format, va_list va) { - int len; - unsigned left; - char *next; - gz_statep state; - z_streamp strm; - - /* get internal structure */ - if (file == NULL) - return Z_STREAM_ERROR; - state = (gz_statep)file; - strm = &(state->strm); - - /* check that we're writing and that there's no error */ - if (state->mode != GZ_WRITE || state->err != Z_OK) - return Z_STREAM_ERROR; - - /* make sure we have some buffer space */ - if (state->size == 0 && gz_init(state) == -1) - return state->err; - - /* check for seek request */ - if (state->seek) { - state->seek = 0; - if (gz_zero(state, state->skip) == -1) - return state->err; - } - - /* do the printf() into the input buffer, put length in len -- the input - buffer is double-sized just for this function, so there is guaranteed to - be state->size bytes available after the current contents */ - if (strm->avail_in == 0) - strm->next_in = state->in; - next = (char *)(state->in + (strm->next_in - state->in) + strm->avail_in); - next[state->size - 1] = 0; -#ifdef NO_vsnprintf -# ifdef HAS_vsprintf_void - (void)vsprintf(next, format, va); - for (len = 0; len < state->size; len++) - if (next[len] == 0) break; -# else - len = vsprintf(next, format, va); -# endif -#else -# ifdef HAS_vsnprintf_void - (void)vsnprintf(next, state->size, format, va); - len = strlen(next); -# else - len = vsnprintf(next, state->size, format, va); -# endif -#endif - - /* check that printf() results fit in buffer */ - if (len == 0 || (unsigned)len >= state->size || next[state->size - 1] != 0) - return 0; - - /* update buffer and position, compress first half if past that */ - strm->avail_in += (unsigned)len; - state->x.pos += len; - if (strm->avail_in >= state->size) { - left = strm->avail_in - state->size; - strm->avail_in = state->size; - if (gz_comp(state, Z_NO_FLUSH) == -1) - return state->err; - memmove(state->in, state->in + state->size, left); - strm->next_in = state->in; - strm->avail_in = left; - } - return len; -} - -int ZEXPORTVA gzprintf(gzFile file, const char *format, ...) { - va_list va; - int ret; - - va_start(va, format); - ret = gzvprintf(file, format, va); - va_end(va); - return ret; -} - -#else /* !STDC && !Z_HAVE_STDARG_H */ - -/* -- see zlib.h -- */ -int ZEXPORTVA gzprintf(gzFile file, const char *format, int a1, int a2, int a3, - int a4, int a5, int a6, int a7, int a8, int a9, int a10, - int a11, int a12, int a13, int a14, int a15, int a16, - int a17, int a18, int a19, int a20) { - unsigned len, left; - char *next; - gz_statep state; - z_streamp strm; - - /* get internal structure */ - if (file == NULL) - return Z_STREAM_ERROR; - state = (gz_statep)file; - strm = &(state->strm); - - /* check that can really pass pointer in ints */ - if (sizeof(int) != sizeof(void *)) - return Z_STREAM_ERROR; - - /* check that we're writing and that there's no error */ - if (state->mode != GZ_WRITE || state->err != Z_OK) - return Z_STREAM_ERROR; - - /* make sure we have some buffer space */ - if (state->size == 0 && gz_init(state) == -1) - return state->error; - - /* check for seek request */ - if (state->seek) { - state->seek = 0; - if (gz_zero(state, state->skip) == -1) - return state->error; - } - - /* do the printf() into the input buffer, put length in len -- the input - buffer is double-sized just for this function, so there is guaranteed to - be state->size bytes available after the current contents */ - if (strm->avail_in == 0) - strm->next_in = state->in; - next = (char *)(strm->next_in + strm->avail_in); - next[state->size - 1] = 0; -#ifdef NO_snprintf -# ifdef HAS_sprintf_void - sprintf(next, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, a11, a12, - a13, a14, a15, a16, a17, a18, a19, a20); - for (len = 0; len < size; len++) - if (next[len] == 0) - break; -# else - len = sprintf(next, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, a11, - a12, a13, a14, a15, a16, a17, a18, a19, a20); -# endif -#else -# ifdef HAS_snprintf_void - snprintf(next, state->size, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, - a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); - len = strlen(next); -# else - len = snprintf(next, state->size, format, a1, a2, a3, a4, a5, a6, a7, a8, - a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); -# endif -#endif - - /* check that printf() results fit in buffer */ - if (len == 0 || len >= state->size || next[state->size - 1] != 0) - return 0; - - /* update buffer and position, compress first half if past that */ - strm->avail_in += len; - state->x.pos += len; - if (strm->avail_in >= state->size) { - left = strm->avail_in - state->size; - strm->avail_in = state->size; - if (gz_comp(state, Z_NO_FLUSH) == -1) - return state->err; - memmove(state->in, state->in + state->size, left); - strm->next_in = state->in; - strm->avail_in = left; - } - return (int)len; -} - -#endif - -/* -- see zlib.h -- */ -int ZEXPORT gzflush(gzFile file, int flush) { - gz_statep state; - - /* get internal structure */ - if (file == NULL) - return Z_STREAM_ERROR; - state = (gz_statep)file; - - /* check that we're writing and that there's no error */ - if (state->mode != GZ_WRITE || state->err != Z_OK) - return Z_STREAM_ERROR; - - /* check flush parameter */ - if (flush < 0 || flush > Z_FINISH) - return Z_STREAM_ERROR; - - /* check for seek request */ - if (state->seek) { - state->seek = 0; - if (gz_zero(state, state->skip) == -1) - return state->err; - } - - /* compress remaining data with requested flush */ - (void)gz_comp(state, flush); - return state->err; -} - -/* -- see zlib.h -- */ -int ZEXPORT gzsetparams(gzFile file, int level, int strategy) { - gz_statep state; - z_streamp strm; - - /* get internal structure */ - if (file == NULL) - return Z_STREAM_ERROR; - state = (gz_statep)file; - strm = &(state->strm); - - /* check that we're writing and that there's no error */ - if (state->mode != GZ_WRITE || state->err != Z_OK || state->direct) - return Z_STREAM_ERROR; - - /* if no change is requested, then do nothing */ - if (level == state->level && strategy == state->strategy) - return Z_OK; - - /* check for seek request */ - if (state->seek) { - state->seek = 0; - if (gz_zero(state, state->skip) == -1) - return state->err; - } - - /* change compression parameters for subsequent input */ - if (state->size) { - /* flush previous input with previous parameters before changing */ - if (strm->avail_in && gz_comp(state, Z_BLOCK) == -1) - return state->err; - deflateParams(strm, level, strategy); - } - state->level = level; - state->strategy = strategy; - return Z_OK; -} - -/* -- see zlib.h -- */ -int ZEXPORT gzclose_w(gzFile file) { - int ret = Z_OK; - gz_statep state; - - /* get internal structure */ - if (file == NULL) - return Z_STREAM_ERROR; - state = (gz_statep)file; - - /* check that we're writing */ - if (state->mode != GZ_WRITE) - return Z_STREAM_ERROR; - - /* check for seek request */ - if (state->seek) { - state->seek = 0; - if (gz_zero(state, state->skip) == -1) - ret = state->err; - } - - /* flush, free memory, and close file */ - if (gz_comp(state, Z_FINISH) == -1) - ret = state->err; - if (state->size) { - if (!state->direct) { - (void)deflateEnd(&(state->strm)); - free(state->out); - } - free(state->in); - } - gz_error(state, Z_OK, NULL); - free(state->path); - if (close(state->fd) == -1) - ret = Z_ERRNO; - free(state); - return ret; -} diff --git a/src/common/zlib/infback.c b/src/common/zlib/infback.c index e65f3cb0..9ce64f30 100644 --- a/src/common/zlib/infback.c +++ b/src/common/zlib/infback.c @@ -36,19 +36,11 @@ int ZEXPORT inflateBackInit_(z_streamp strm, int windowBits, return Z_STREAM_ERROR; strm->msg = Z_NULL; /* in case we return an error */ if (strm->zalloc == (alloc_func)0) { -#ifdef Z_SOLO - return Z_STREAM_ERROR; -#else strm->zalloc = zcalloc; strm->opaque = (voidpf)0; -#endif } if (strm->zfree == (free_func)0) -#ifdef Z_SOLO - return Z_STREAM_ERROR; -#else - strm->zfree = zcfree; -#endif + strm->zfree = zcfree; state = (struct inflate_state FAR *)ZALLOC(strm, 1, sizeof(struct inflate_state)); if (state == Z_NULL) return Z_MEM_ERROR; diff --git a/src/common/zlib/inflate.c b/src/common/zlib/inflate.c index 3d0aef4d..62f0603c 100644 --- a/src/common/zlib/inflate.c +++ b/src/common/zlib/inflate.c @@ -187,19 +187,11 @@ int ZEXPORT inflateInit2_(z_streamp strm, int windowBits, if (strm == Z_NULL) return Z_STREAM_ERROR; strm->msg = Z_NULL; /* in case we return an error */ if (strm->zalloc == (alloc_func)0) { -#ifdef Z_SOLO - return Z_STREAM_ERROR; -#else strm->zalloc = zcalloc; strm->opaque = (voidpf)0; -#endif } if (strm->zfree == (free_func)0) -#ifdef Z_SOLO - return Z_STREAM_ERROR; -#else strm->zfree = zcfree; -#endif state = (struct inflate_state FAR *) ZALLOC(strm, 1, sizeof(struct inflate_state)); if (state == Z_NULL) return Z_MEM_ERROR; diff --git a/src/common/zlib/uncompr.c b/src/common/zlib/uncompr.c deleted file mode 100644 index f821595b..00000000 --- a/src/common/zlib/uncompr.c +++ /dev/null @@ -1,86 +0,0 @@ -// SPDX-License-Identifier: Zlib -/* uncompr.c -- decompress a memory buffer - * Copyright (C) 1995-2003, 2010, 2014, 2016 Jean-loup Gailly, Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* @(#) $Id$ */ - -#define ZLIB_INTERNAL -#include "zlib.h" - -/* =========================================================================== - Decompresses the source buffer into the destination buffer. *sourceLen is - the byte length of the source buffer. Upon entry, *destLen is the total size - of the destination buffer, which must be large enough to hold the entire - uncompressed data. (The size of the uncompressed data must have been saved - previously by the compressor and transmitted to the decompressor by some - mechanism outside the scope of this compression library.) Upon exit, - *destLen is the size of the decompressed data and *sourceLen is the number - of source bytes consumed. Upon return, source + *sourceLen points to the - first unused input byte. - - uncompress returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_BUF_ERROR if there was not enough room in the output buffer, or - Z_DATA_ERROR if the input data was corrupted, including if the input data is - an incomplete zlib stream. -*/ -int ZEXPORT uncompress2(Bytef *dest, uLongf *destLen, const Bytef *source, - uLong *sourceLen) { - z_stream stream; - int err; - const uInt max = (uInt)-1; - uLong len, left; - Byte buf[1]; /* for detection of incomplete stream when *destLen == 0 */ - - len = *sourceLen; - if (*destLen) { - left = *destLen; - *destLen = 0; - } - else { - left = 1; - dest = buf; - } - - stream.next_in = (z_const Bytef *)source; - stream.avail_in = 0; - stream.zalloc = (alloc_func)0; - stream.zfree = (free_func)0; - stream.opaque = (voidpf)0; - - err = inflateInit(&stream); - if (err != Z_OK) return err; - - stream.next_out = dest; - stream.avail_out = 0; - - do { - if (stream.avail_out == 0) { - stream.avail_out = left > (uLong)max ? max : (uInt)left; - left -= stream.avail_out; - } - if (stream.avail_in == 0) { - stream.avail_in = len > (uLong)max ? max : (uInt)len; - len -= stream.avail_in; - } - err = inflate(&stream, Z_NO_FLUSH); - } while (err == Z_OK); - - *sourceLen -= len + stream.avail_in; - if (dest != buf) - *destLen = stream.total_out; - else if (stream.total_out && err == Z_BUF_ERROR) - left = 1; - - inflateEnd(&stream); - return err == Z_STREAM_END ? Z_OK : - err == Z_NEED_DICT ? Z_DATA_ERROR : - err == Z_BUF_ERROR && left + stream.avail_out ? Z_DATA_ERROR : - err; -} - -int ZEXPORT uncompress(Bytef *dest, uLongf *destLen, const Bytef *source, - uLong sourceLen) { - return uncompress2(dest, destLen, source, &sourceLen); -} diff --git a/src/common/zlib/zconf.h b/src/common/zlib/zconf.h index 58e3a17f..5e762605 100644 --- a/src/common/zlib/zconf.h +++ b/src/common/zlib/zconf.h @@ -9,166 +9,6 @@ #ifndef ZCONF_H #define ZCONF_H -/* - * If you *really* need a unique prefix for all types and library functions, - * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. - * Even better than compiling with -DZ_PREFIX would be to use configure to set - * this permanently in zconf.h using "./configure --zprefix". - */ -#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */ -# define Z_PREFIX_SET - -/* all linked symbols and init macros */ -# define _dist_code z__dist_code -# define _length_code z__length_code -# define _tr_align z__tr_align -# define _tr_flush_bits z__tr_flush_bits -# define _tr_flush_block z__tr_flush_block -# define _tr_init z__tr_init -# define _tr_stored_block z__tr_stored_block -# define _tr_tally z__tr_tally -# define adler32 z_adler32 -# define adler32_combine z_adler32_combine -# define adler32_combine64 z_adler32_combine64 -# define adler32_z z_adler32_z -# ifndef Z_SOLO -# define compress z_compress -# define compress2 z_compress2 -# define compressBound z_compressBound -# endif -# define crc32 z_crc32 -# define crc32_combine z_crc32_combine -# define crc32_combine64 z_crc32_combine64 -# define crc32_combine_gen z_crc32_combine_gen -# define crc32_combine_gen64 z_crc32_combine_gen64 -# define crc32_combine_op z_crc32_combine_op -# define crc32_z z_crc32_z -# define deflate z_deflate -# define deflateBound z_deflateBound -# define deflateCopy z_deflateCopy -# define deflateEnd z_deflateEnd -# define deflateGetDictionary z_deflateGetDictionary -# define deflateInit z_deflateInit -# define deflateInit2 z_deflateInit2 -# define deflateInit2_ z_deflateInit2_ -# define deflateInit_ z_deflateInit_ -# define deflateParams z_deflateParams -# define deflatePending z_deflatePending -# define deflatePrime z_deflatePrime -# define deflateReset z_deflateReset -# define deflateResetKeep z_deflateResetKeep -# define deflateSetDictionary z_deflateSetDictionary -# define deflateSetHeader z_deflateSetHeader -# define deflateTune z_deflateTune -# define deflate_copyright z_deflate_copyright -# define get_crc_table z_get_crc_table -# ifndef Z_SOLO -# define gz_error z_gz_error -# define gz_intmax z_gz_intmax -# define gz_strwinerror z_gz_strwinerror -# define gzbuffer z_gzbuffer -# define gzclearerr z_gzclearerr -# define gzclose z_gzclose -# define gzclose_r z_gzclose_r -# define gzclose_w z_gzclose_w -# define gzdirect z_gzdirect -# define gzdopen z_gzdopen -# define gzeof z_gzeof -# define gzerror z_gzerror -# define gzflush z_gzflush -# define gzfread z_gzfread -# define gzfwrite z_gzfwrite -# define gzgetc z_gzgetc -# define gzgetc_ z_gzgetc_ -# define gzgets z_gzgets -# define gzoffset z_gzoffset -# define gzoffset64 z_gzoffset64 -# define gzopen z_gzopen -# define gzopen64 z_gzopen64 -# ifdef _WIN32 -# define gzopen_w z_gzopen_w -# endif -# define gzprintf z_gzprintf -# define gzputc z_gzputc -# define gzputs z_gzputs -# define gzread z_gzread -# define gzrewind z_gzrewind -# define gzseek z_gzseek -# define gzseek64 z_gzseek64 -# define gzsetparams z_gzsetparams -# define gztell z_gztell -# define gztell64 z_gztell64 -# define gzungetc z_gzungetc -# define gzvprintf z_gzvprintf -# define gzwrite z_gzwrite -# endif -# define inflate z_inflate -# define inflateBack z_inflateBack -# define inflateBackEnd z_inflateBackEnd -# define inflateBackInit z_inflateBackInit -# define inflateBackInit_ z_inflateBackInit_ -# define inflateCodesUsed z_inflateCodesUsed -# define inflateCopy z_inflateCopy -# define inflateEnd z_inflateEnd -# define inflateGetDictionary z_inflateGetDictionary -# define inflateGetHeader z_inflateGetHeader -# define inflateInit z_inflateInit -# define inflateInit2 z_inflateInit2 -# define inflateInit2_ z_inflateInit2_ -# define inflateInit_ z_inflateInit_ -# define inflateMark z_inflateMark -# define inflatePrime z_inflatePrime -# define inflateReset z_inflateReset -# define inflateReset2 z_inflateReset2 -# define inflateResetKeep z_inflateResetKeep -# define inflateSetDictionary z_inflateSetDictionary -# define inflateSync z_inflateSync -# define inflateSyncPoint z_inflateSyncPoint -# define inflateUndermine z_inflateUndermine -# define inflateValidate z_inflateValidate -# define inflate_copyright z_inflate_copyright -# define inflate_fast z_inflate_fast -# define inflate_table z_inflate_table -# ifndef Z_SOLO -# define uncompress z_uncompress -# define uncompress2 z_uncompress2 -# endif -# define zError z_zError -# ifndef Z_SOLO -# define zcalloc z_zcalloc -# define zcfree z_zcfree -# endif -# define zlibCompileFlags z_zlibCompileFlags -# define zlibVersion z_zlibVersion - -/* all zlib typedefs in zlib.h and zconf.h */ -# define Byte z_Byte -# define Bytef z_Bytef -# define alloc_func z_alloc_func -# define charf z_charf -# define free_func z_free_func -# ifndef Z_SOLO -# define gzFile z_gzFile -# endif -# define gz_header z_gz_header -# define gz_headerp z_gz_headerp -# define in_func z_in_func -# define intf z_intf -# define out_func z_out_func -# define uInt z_uInt -# define uIntf z_uIntf -# define uLong z_uLong -# define uLongf z_uLongf -# define voidp z_voidp -# define voidpc z_voidpc -# define voidpf z_voidpf - -/* all zlib structs in zlib.h and zconf.h */ -# define gz_header_s z_gz_header_s -# define internal_state z_internal_state - -#endif - #if defined(__MSDOS__) && !defined(MSDOS) # define MSDOS #endif @@ -241,24 +81,16 @@ # define z_const #endif -#ifdef Z_SOLO -# ifdef _WIN64 - typedef unsigned long long z_size_t; -# else - typedef unsigned long z_size_t; -# endif +#define z_longlong long long +#if defined(NO_SIZE_T) + typedef unsigned NO_SIZE_T z_size_t; +#elif defined(STDC) +# include + typedef size_t z_size_t; #else -# define z_longlong long long -# if defined(NO_SIZE_T) - typedef unsigned NO_SIZE_T z_size_t; -# elif defined(STDC) -# include - typedef size_t z_size_t; -# else - typedef unsigned long z_size_t; -# endif -# undef z_longlong + typedef unsigned long z_size_t; #endif +#undef z_longlong /* Maximum value for memLevel in deflateInit2 */ #ifndef MAX_MEM_LEVEL @@ -417,7 +249,7 @@ typedef uLong FAR uLongf; typedef Byte *voidp; #endif -#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC) +#if !defined(Z_U4) && defined(STDC) # include # if (UINT_MAX == 0xffffffffUL) # define Z_U4 unsigned @@ -443,21 +275,15 @@ typedef uLong FAR uLongf; #endif #ifdef STDC -# ifndef Z_SOLO -# include /* for off_t */ -# endif +# include /* for off_t */ #endif #if defined(STDC) || defined(Z_HAVE_STDARG_H) -# ifndef Z_SOLO -# include /* for va_list */ -# endif +# include /* for va_list */ #endif #ifdef _WIN32 -# ifndef Z_SOLO -# include /* for wchar_t */ -# endif +# include /* for wchar_t */ #endif /* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and @@ -480,15 +306,14 @@ typedef uLong FAR uLongf; # define Z_HAVE_UNISTD_H # endif #endif -#ifndef Z_SOLO -# if defined(Z_HAVE_UNISTD_H) -# include /* for SEEK_*, off_t, and _LFS64_LARGEFILE */ -# ifdef VMS -# include /* for off_t */ -# endif -# ifndef z_off_t -# define z_off_t off_t -# endif + +#if defined(Z_HAVE_UNISTD_H) +# include /* for SEEK_*, off_t, and _LFS64_LARGEFILE */ +# ifdef VMS +# include /* for off_t */ +# endif +# ifndef z_off_t +# define z_off_t off_t # endif #endif @@ -504,7 +329,7 @@ typedef uLong FAR uLongf; # define Z_WANT64 #endif -#if !defined(SEEK_SET) && !defined(Z_SOLO) +#if !defined(SEEK_SET) # define SEEK_SET 0 /* Seek from beginning of file. */ # define SEEK_CUR 1 /* Seek from current position. */ # define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ diff --git a/src/common/zlib/zlib.h b/src/common/zlib/zlib.h index 626fb377..8a3da5a2 100644 --- a/src/common/zlib/zlib.h +++ b/src/common/zlib/zlib.h @@ -1218,470 +1218,6 @@ ZEXTERN uLong ZEXPORT zlibCompileFlags(void); 27-31: 0 (reserved) */ -#ifndef Z_SOLO - - /* utility functions */ - -/* - The following utility functions are implemented on top of the basic - stream-oriented functions. To simplify the interface, some default options - are assumed (compression level and memory usage, standard memory allocation - functions). The source code of these utility functions can be modified if - you need special options. -*/ - -ZEXTERN int ZEXPORT compress(Bytef *dest, uLongf *destLen, - const Bytef *source, uLong sourceLen); -/* - Compresses the source buffer into the destination buffer. sourceLen is - the byte length of the source buffer. Upon entry, destLen is the total size - of the destination buffer, which must be at least the value returned by - compressBound(sourceLen). Upon exit, destLen is the actual size of the - compressed data. compress() is equivalent to compress2() with a level - parameter of Z_DEFAULT_COMPRESSION. - - compress returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_BUF_ERROR if there was not enough room in the output - buffer. -*/ - -ZEXTERN int ZEXPORT compress2(Bytef *dest, uLongf *destLen, - const Bytef *source, uLong sourceLen, - int level); -/* - Compresses the source buffer into the destination buffer. The level - parameter has the same meaning as in deflateInit. sourceLen is the byte - length of the source buffer. Upon entry, destLen is the total size of the - destination buffer, which must be at least the value returned by - compressBound(sourceLen). Upon exit, destLen is the actual size of the - compressed data. - - compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_BUF_ERROR if there was not enough room in the output buffer, - Z_STREAM_ERROR if the level parameter is invalid. -*/ - -ZEXTERN uLong ZEXPORT compressBound(uLong sourceLen); -/* - compressBound() returns an upper bound on the compressed size after - compress() or compress2() on sourceLen bytes. It would be used before a - compress() or compress2() call to allocate the destination buffer. -*/ - -ZEXTERN int ZEXPORT uncompress(Bytef *dest, uLongf *destLen, - const Bytef *source, uLong sourceLen); -/* - Decompresses the source buffer into the destination buffer. sourceLen is - the byte length of the source buffer. Upon entry, destLen is the total size - of the destination buffer, which must be large enough to hold the entire - uncompressed data. (The size of the uncompressed data must have been saved - previously by the compressor and transmitted to the decompressor by some - mechanism outside the scope of this compression library.) Upon exit, destLen - is the actual size of the uncompressed data. - - uncompress returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_BUF_ERROR if there was not enough room in the output - buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete. In - the case where there is not enough room, uncompress() will fill the output - buffer with the uncompressed data up to that point. -*/ - -ZEXTERN int ZEXPORT uncompress2(Bytef *dest, uLongf *destLen, - const Bytef *source, uLong *sourceLen); -/* - Same as uncompress, except that sourceLen is a pointer, where the - length of the source is *sourceLen. On return, *sourceLen is the number of - source bytes consumed. -*/ - - /* gzip file access functions */ - -/* - This library supports reading and writing files in gzip (.gz) format with - an interface similar to that of stdio, using the functions that start with - "gz". The gzip format is different from the zlib format. gzip is a gzip - wrapper, documented in RFC 1952, wrapped around a deflate stream. -*/ - -typedef struct gzFile_s *gzFile; /* semi-opaque gzip file descriptor */ - -/* -ZEXTERN gzFile ZEXPORT gzopen(const char *path, const char *mode); - - Open the gzip (.gz) file at path for reading and decompressing, or - compressing and writing. The mode parameter is as in fopen ("rb" or "wb") - but can also include a compression level ("wb9") or a strategy: 'f' for - filtered data as in "wb6f", 'h' for Huffman-only compression as in "wb1h", - 'R' for run-length encoding as in "wb1R", or 'F' for fixed code compression - as in "wb9F". (See the description of deflateInit2 for more information - about the strategy parameter.) 'T' will request transparent writing or - appending with no compression and not using the gzip format. - - "a" can be used instead of "w" to request that the gzip stream that will - be written be appended to the file. "+" will result in an error, since - reading and writing to the same gzip file is not supported. The addition of - "x" when writing will create the file exclusively, which fails if the file - already exists. On systems that support it, the addition of "e" when - reading or writing will set the flag to close the file on an execve() call. - - These functions, as well as gzip, will read and decode a sequence of gzip - streams in a file. The append function of gzopen() can be used to create - such a file. (Also see gzflush() for another way to do this.) When - appending, gzopen does not test whether the file begins with a gzip stream, - nor does it look for the end of the gzip streams to begin appending. gzopen - will simply append a gzip stream to the existing file. - - gzopen can be used to read a file which is not in gzip format; in this - case gzread will directly read from the file without decompression. When - reading, this will be detected automatically by looking for the magic two- - byte gzip header. - - gzopen returns NULL if the file could not be opened, if there was - insufficient memory to allocate the gzFile state, or if an invalid mode was - specified (an 'r', 'w', or 'a' was not provided, or '+' was provided). - errno can be checked to determine if the reason gzopen failed was that the - file could not be opened. -*/ - -ZEXTERN gzFile ZEXPORT gzdopen(int fd, const char *mode); -/* - Associate a gzFile with the file descriptor fd. File descriptors are - obtained from calls like open, dup, creat, pipe or fileno (if the file has - been previously opened with fopen). The mode parameter is as in gzopen. - - The next call of gzclose on the returned gzFile will also close the file - descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor - fd. If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd, - mode);. The duplicated descriptor should be saved to avoid a leak, since - gzdopen does not close fd if it fails. If you are using fileno() to get the - file descriptor from a FILE *, then you will have to use dup() to avoid - double-close()ing the file descriptor. Both gzclose() and fclose() will - close the associated file descriptor, so they need to have different file - descriptors. - - gzdopen returns NULL if there was insufficient memory to allocate the - gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not - provided, or '+' was provided), or if fd is -1. The file descriptor is not - used until the next gz* read, write, seek, or close operation, so gzdopen - will not detect if fd is invalid (unless fd is -1). -*/ - -ZEXTERN int ZEXPORT gzbuffer(gzFile file, unsigned size); -/* - Set the internal buffer size used by this library's functions for file to - size. The default buffer size is 8192 bytes. This function must be called - after gzopen() or gzdopen(), and before any other calls that read or write - the file. The buffer memory allocation is always deferred to the first read - or write. Three times that size in buffer space is allocated. A larger - buffer size of, for example, 64K or 128K bytes will noticeably increase the - speed of decompression (reading). - - The new buffer size also affects the maximum length for gzprintf(). - - gzbuffer() returns 0 on success, or -1 on failure, such as being called - too late. -*/ - -ZEXTERN int ZEXPORT gzsetparams(gzFile file, int level, int strategy); -/* - Dynamically update the compression level and strategy for file. See the - description of deflateInit2 for the meaning of these parameters. Previously - provided data is flushed before applying the parameter changes. - - gzsetparams returns Z_OK if success, Z_STREAM_ERROR if the file was not - opened for writing, Z_ERRNO if there is an error writing the flushed data, - or Z_MEM_ERROR if there is a memory allocation error. -*/ - -ZEXTERN int ZEXPORT gzread(gzFile file, voidp buf, unsigned len); -/* - Read and decompress up to len uncompressed bytes from file into buf. If - the input file is not in gzip format, gzread copies the given number of - bytes into the buffer directly from the file. - - After reaching the end of a gzip stream in the input, gzread will continue - to read, looking for another gzip stream. Any number of gzip streams may be - concatenated in the input file, and will all be decompressed by gzread(). - If something other than a gzip stream is encountered after a gzip stream, - that remaining trailing garbage is ignored (and no error is returned). - - gzread can be used to read a gzip file that is being concurrently written. - Upon reaching the end of the input, gzread will return with the available - data. If the error code returned by gzerror is Z_OK or Z_BUF_ERROR, then - gzclearerr can be used to clear the end of file indicator in order to permit - gzread to be tried again. Z_OK indicates that a gzip stream was completed - on the last gzread. Z_BUF_ERROR indicates that the input file ended in the - middle of a gzip stream. Note that gzread does not return -1 in the event - of an incomplete gzip stream. This error is deferred until gzclose(), which - will return Z_BUF_ERROR if the last gzread ended in the middle of a gzip - stream. Alternatively, gzerror can be used before gzclose to detect this - case. - - gzread returns the number of uncompressed bytes actually read, less than - len for end of file, or -1 for error. If len is too large to fit in an int, - then nothing is read, -1 is returned, and the error state is set to - Z_STREAM_ERROR. -*/ - -ZEXTERN z_size_t ZEXPORT gzfread(voidp buf, z_size_t size, z_size_t nitems, - gzFile file); -/* - Read and decompress up to nitems items of size size from file into buf, - otherwise operating as gzread() does. This duplicates the interface of - stdio's fread(), with size_t request and return types. If the library - defines size_t, then z_size_t is identical to size_t. If not, then z_size_t - is an unsigned integer type that can contain a pointer. - - gzfread() returns the number of full items read of size size, or zero if - the end of the file was reached and a full item could not be read, or if - there was an error. gzerror() must be consulted if zero is returned in - order to determine if there was an error. If the multiplication of size and - nitems overflows, i.e. the product does not fit in a z_size_t, then nothing - is read, zero is returned, and the error state is set to Z_STREAM_ERROR. - - In the event that the end of file is reached and only a partial item is - available at the end, i.e. the remaining uncompressed data length is not a - multiple of size, then the final partial item is nevertheless read into buf - and the end-of-file flag is set. The length of the partial item read is not - provided, but could be inferred from the result of gztell(). This behavior - is the same as the behavior of fread() implementations in common libraries, - but it prevents the direct use of gzfread() to read a concurrently written - file, resetting and retrying on end-of-file, when size is not 1. -*/ - -ZEXTERN int ZEXPORT gzwrite(gzFile file, voidpc buf, unsigned len); -/* - Compress and write the len uncompressed bytes at buf to file. gzwrite - returns the number of uncompressed bytes written or 0 in case of error. -*/ - -ZEXTERN z_size_t ZEXPORT gzfwrite(voidpc buf, z_size_t size, - z_size_t nitems, gzFile file); -/* - Compress and write nitems items of size size from buf to file, duplicating - the interface of stdio's fwrite(), with size_t request and return types. If - the library defines size_t, then z_size_t is identical to size_t. If not, - then z_size_t is an unsigned integer type that can contain a pointer. - - gzfwrite() returns the number of full items written of size size, or zero - if there was an error. If the multiplication of size and nitems overflows, - i.e. the product does not fit in a z_size_t, then nothing is written, zero - is returned, and the error state is set to Z_STREAM_ERROR. -*/ - -ZEXTERN int ZEXPORTVA gzprintf(gzFile file, const char *format, ...); -/* - Convert, format, compress, and write the arguments (...) to file under - control of the string format, as in fprintf. gzprintf returns the number of - uncompressed bytes actually written, or a negative zlib error code in case - of error. The number of uncompressed bytes written is limited to 8191, or - one less than the buffer size given to gzbuffer(). The caller should assure - that this limit is not exceeded. If it is exceeded, then gzprintf() will - return an error (0) with nothing written. In this case, there may also be a - buffer overflow with unpredictable consequences, which is possible only if - zlib was compiled with the insecure functions sprintf() or vsprintf(), - because the secure snprintf() or vsnprintf() functions were not available. - This can be determined using zlibCompileFlags(). -*/ - -ZEXTERN int ZEXPORT gzputs(gzFile file, const char *s); -/* - Compress and write the given null-terminated string s to file, excluding - the terminating null character. - - gzputs returns the number of characters written, or -1 in case of error. -*/ - -ZEXTERN char * ZEXPORT gzgets(gzFile file, char *buf, int len); -/* - Read and decompress bytes from file into buf, until len-1 characters are - read, or until a newline character is read and transferred to buf, or an - end-of-file condition is encountered. If any characters are read or if len - is one, the string is terminated with a null character. If no characters - are read due to an end-of-file or len is less than one, then the buffer is - left untouched. - - gzgets returns buf which is a null-terminated string, or it returns NULL - for end-of-file or in case of error. If there was an error, the contents at - buf are indeterminate. -*/ - -ZEXTERN int ZEXPORT gzputc(gzFile file, int c); -/* - Compress and write c, converted to an unsigned char, into file. gzputc - returns the value that was written, or -1 in case of error. -*/ - -ZEXTERN int ZEXPORT gzgetc(gzFile file); -/* - Read and decompress one byte from file. gzgetc returns this byte or -1 - in case of end of file or error. This is implemented as a macro for speed. - As such, it does not do all of the checking the other functions do. I.e. - it does not check to see if file is NULL, nor whether the structure file - points to has been clobbered or not. -*/ - -ZEXTERN int ZEXPORT gzungetc(int c, gzFile file); -/* - Push c back onto the stream for file to be read as the first character on - the next read. At least one character of push-back is always allowed. - gzungetc() returns the character pushed, or -1 on failure. gzungetc() will - fail if c is -1, and may fail if a character has been pushed but not read - yet. If gzungetc is used immediately after gzopen or gzdopen, at least the - output buffer size of pushed characters is allowed. (See gzbuffer above.) - The pushed character will be discarded if the stream is repositioned with - gzseek() or gzrewind(). -*/ - -ZEXTERN int ZEXPORT gzflush(gzFile file, int flush); -/* - Flush all pending output to file. The parameter flush is as in the - deflate() function. The return value is the zlib error number (see function - gzerror below). gzflush is only permitted when writing. - - If the flush parameter is Z_FINISH, the remaining data is written and the - gzip stream is completed in the output. If gzwrite() is called again, a new - gzip stream will be started in the output. gzread() is able to read such - concatenated gzip streams. - - gzflush should be called only when strictly necessary because it will - degrade compression if called too often. -*/ - -/* -ZEXTERN z_off_t ZEXPORT gzseek(gzFile file, - z_off_t offset, int whence); - - Set the starting position to offset relative to whence for the next gzread - or gzwrite on file. The offset represents a number of bytes in the - uncompressed data stream. The whence parameter is defined as in lseek(2); - the value SEEK_END is not supported. - - If the file is opened for reading, this function is emulated but can be - extremely slow. If the file is opened for writing, only forward seeks are - supported; gzseek then compresses a sequence of zeroes up to the new - starting position. - - gzseek returns the resulting offset location as measured in bytes from - the beginning of the uncompressed stream, or -1 in case of error, in - particular if the file is opened for writing and the new starting position - would be before the current position. -*/ - -ZEXTERN int ZEXPORT gzrewind(gzFile file); -/* - Rewind file. This function is supported only for reading. - - gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET). -*/ - -/* -ZEXTERN z_off_t ZEXPORT gztell(gzFile file); - - Return the starting position for the next gzread or gzwrite on file. - This position represents a number of bytes in the uncompressed data stream, - and is zero when starting, even if appending or reading a gzip stream from - the middle of a file using gzdopen(). - - gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR) -*/ - -/* -ZEXTERN z_off_t ZEXPORT gzoffset(gzFile file); - - Return the current compressed (actual) read or write offset of file. This - offset includes the count of bytes that precede the gzip stream, for example - when appending or when using gzdopen() for reading. When reading, the - offset does not include as yet unused buffered input. This information can - be used for a progress indicator. On error, gzoffset() returns -1. -*/ - -ZEXTERN int ZEXPORT gzeof(gzFile file); -/* - Return true (1) if the end-of-file indicator for file has been set while - reading, false (0) otherwise. Note that the end-of-file indicator is set - only if the read tried to go past the end of the input, but came up short. - Therefore, just like feof(), gzeof() may return false even if there is no - more data to read, in the event that the last read request was for the exact - number of bytes remaining in the input file. This will happen if the input - file size is an exact multiple of the buffer size. - - If gzeof() returns true, then the read functions will return no more data, - unless the end-of-file indicator is reset by gzclearerr() and the input file - has grown since the previous end of file was detected. -*/ - -ZEXTERN int ZEXPORT gzdirect(gzFile file); -/* - Return true (1) if file is being copied directly while reading, or false - (0) if file is a gzip stream being decompressed. - - If the input file is empty, gzdirect() will return true, since the input - does not contain a gzip stream. - - If gzdirect() is used immediately after gzopen() or gzdopen() it will - cause buffers to be allocated to allow reading the file to determine if it - is a gzip file. Therefore if gzbuffer() is used, it should be called before - gzdirect(). - - When writing, gzdirect() returns true (1) if transparent writing was - requested ("wT" for the gzopen() mode), or false (0) otherwise. (Note: - gzdirect() is not needed when writing. Transparent writing must be - explicitly requested, so the application already knows the answer. When - linking statically, using gzdirect() will include all of the zlib code for - gzip file reading and decompression, which may not be desired.) -*/ - -ZEXTERN int ZEXPORT gzclose(gzFile file); -/* - Flush all pending output for file, if necessary, close file and - deallocate the (de)compression state. Note that once file is closed, you - cannot call gzerror with file, since its structures have been deallocated. - gzclose must not be called more than once on the same file, just as free - must not be called more than once on the same allocation. - - gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a - file operation error, Z_MEM_ERROR if out of memory, Z_BUF_ERROR if the - last read ended in the middle of a gzip stream, or Z_OK on success. -*/ - -ZEXTERN int ZEXPORT gzclose_r(gzFile file); -ZEXTERN int ZEXPORT gzclose_w(gzFile file); -/* - Same as gzclose(), but gzclose_r() is only for use when reading, and - gzclose_w() is only for use when writing or appending. The advantage to - using these instead of gzclose() is that they avoid linking in zlib - compression or decompression code that is not used when only reading or only - writing respectively. If gzclose() is used, then both compression and - decompression code will be included the application when linking to a static - zlib library. -*/ - -ZEXTERN const char * ZEXPORT gzerror(gzFile file, int *errnum); -/* - Return the error message for the last error which occurred on file. - errnum is set to zlib error number. If an error occurred in the file system - and not in the compression library, errnum is set to Z_ERRNO and the - application may consult errno to get the exact error code. - - The application must not modify the returned string. Future calls to - this function may invalidate the previously returned string. If file is - closed, then the string previously returned by gzerror will no longer be - available. - - gzerror() should be used to distinguish errors from end-of-file for those - functions above that do not distinguish those cases in their return values. -*/ - -ZEXTERN void ZEXPORT gzclearerr(gzFile file); -/* - Clear the error and end-of-file flags for file. This is analogous to the - clearerr() function in stdio. This is useful for continuing to read a gzip - file that is being written concurrently. -*/ - -#endif /* !Z_SOLO */ - /* checksum functions */ /* @@ -1826,90 +1362,9 @@ ZEXTERN int ZEXPORT inflateBackInit_(z_streamp strm, int windowBits, ZLIB_VERSION, (int)sizeof(z_stream)) #endif -#ifndef Z_SOLO - -/* gzgetc() macro and its supporting function and exposed data structure. Note - * that the real internal state is much larger than the exposed structure. - * This abbreviated structure exposes just enough for the gzgetc() macro. The - * user should not mess with these exposed elements, since their names or - * behavior could change in the future, perhaps even capriciously. They can - * only be used by the gzgetc() macro. You have been warned. - */ -struct gzFile_s { - unsigned have; - unsigned char *next; - z_off64_t pos; -}; -ZEXTERN int ZEXPORT gzgetc_(gzFile file); /* backward compatibility */ -#ifdef Z_PREFIX_SET -# undef z_gzgetc -# define z_gzgetc(g) \ - ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : (gzgetc)(g)) -#else -# define gzgetc(g) \ - ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : (gzgetc)(g)) -#endif - -/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or - * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if - * both are true, the application gets the *64 functions, and the regular - * functions are changed to 64 bits) -- in case these are set on systems - * without large file support, _LFS64_LARGEFILE must also be true - */ -#ifdef Z_LARGE64 - ZEXTERN gzFile ZEXPORT gzopen64(const char *, const char *); - ZEXTERN z_off64_t ZEXPORT gzseek64(gzFile, z_off64_t, int); - ZEXTERN z_off64_t ZEXPORT gztell64(gzFile); - ZEXTERN z_off64_t ZEXPORT gzoffset64(gzFile); - ZEXTERN uLong ZEXPORT adler32_combine64(uLong, uLong, z_off64_t); - ZEXTERN uLong ZEXPORT crc32_combine64(uLong, uLong, z_off64_t); - ZEXTERN uLong ZEXPORT crc32_combine_gen64(z_off64_t); -#endif - -#if !defined(ZLIB_INTERNAL) && defined(Z_WANT64) -# ifdef Z_PREFIX_SET -# define z_gzopen z_gzopen64 -# define z_gzseek z_gzseek64 -# define z_gztell z_gztell64 -# define z_gzoffset z_gzoffset64 -# define z_adler32_combine z_adler32_combine64 -# define z_crc32_combine z_crc32_combine64 -# define z_crc32_combine_gen z_crc32_combine_gen64 -# else -# define gzopen gzopen64 -# define gzseek gzseek64 -# define gztell gztell64 -# define gzoffset gzoffset64 -# define adler32_combine adler32_combine64 -# define crc32_combine crc32_combine64 -# define crc32_combine_gen crc32_combine_gen64 -# endif -# ifndef Z_LARGE64 - ZEXTERN gzFile ZEXPORT gzopen64(const char *, const char *); - ZEXTERN z_off_t ZEXPORT gzseek64(gzFile, z_off_t, int); - ZEXTERN z_off_t ZEXPORT gztell64(gzFile); - ZEXTERN z_off_t ZEXPORT gzoffset64(gzFile); - ZEXTERN uLong ZEXPORT adler32_combine64(uLong, uLong, z_off_t); - ZEXTERN uLong ZEXPORT crc32_combine64(uLong, uLong, z_off_t); - ZEXTERN uLong ZEXPORT crc32_combine_gen64(z_off_t); -# endif -#else - ZEXTERN gzFile ZEXPORT gzopen(const char *, const char *); - ZEXTERN z_off_t ZEXPORT gzseek(gzFile, z_off_t, int); - ZEXTERN z_off_t ZEXPORT gztell(gzFile); - ZEXTERN z_off_t ZEXPORT gzoffset(gzFile); - ZEXTERN uLong ZEXPORT adler32_combine(uLong, uLong, z_off_t); - ZEXTERN uLong ZEXPORT crc32_combine(uLong, uLong, z_off_t); - ZEXTERN uLong ZEXPORT crc32_combine_gen(z_off_t); -#endif - -#else /* Z_SOLO */ - - ZEXTERN uLong ZEXPORT adler32_combine(uLong, uLong, z_off_t); - ZEXTERN uLong ZEXPORT crc32_combine(uLong, uLong, z_off_t); - ZEXTERN uLong ZEXPORT crc32_combine_gen(z_off_t); - -#endif /* !Z_SOLO */ +ZEXTERN uLong ZEXPORT adler32_combine(uLong, uLong, z_off_t); +ZEXTERN uLong ZEXPORT crc32_combine(uLong, uLong, z_off_t); +ZEXTERN uLong ZEXPORT crc32_combine_gen(z_off_t); /* undocumented functions */ ZEXTERN const char * ZEXPORT zError(int); @@ -1920,17 +1375,6 @@ ZEXTERN int ZEXPORT inflateValidate(z_streamp, int); ZEXTERN unsigned long ZEXPORT inflateCodesUsed(z_streamp); ZEXTERN int ZEXPORT inflateResetKeep(z_streamp); ZEXTERN int ZEXPORT deflateResetKeep(z_streamp); -#if defined(_WIN32) && !defined(Z_SOLO) -ZEXTERN gzFile ZEXPORT gzopen_w(const wchar_t *path, - const char *mode); -#endif -#if defined(STDC) || defined(Z_HAVE_STDARG_H) -# ifndef Z_SOLO -ZEXTERN int ZEXPORTVA gzvprintf(gzFile file, - const char *format, - va_list va); -# endif -#endif #ifdef __cplusplus } diff --git a/src/common/zlib/zutil.c b/src/common/zlib/zutil.c index f10b997c..514e8275 100644 --- a/src/common/zlib/zutil.c +++ b/src/common/zlib/zutil.c @@ -7,9 +7,6 @@ /* @(#) $Id$ */ #include "zutil.h" -#ifndef Z_SOLO -# include "gzguts.h" -#endif z_const char * const z_errmsg[10] = { (z_const char *)"need dictionary", /* Z_NEED_DICT 2 */ @@ -167,8 +164,6 @@ void ZLIB_INTERNAL zmemzero(Bytef* dest, uInt len) { } #endif -#ifndef Z_SOLO - #ifdef SYS16BIT #ifdef __TURBOC__ @@ -296,5 +291,3 @@ void ZLIB_INTERNAL zcfree(voidpf opaque, voidpf ptr) { } #endif /* MY_ZCALLOC */ - -#endif /* !Z_SOLO */ diff --git a/src/common/zlib/zutil.h b/src/common/zlib/zutil.h index 04905068..59e6a8c1 100644 --- a/src/common/zlib/zutil.h +++ b/src/common/zlib/zutil.h @@ -22,7 +22,7 @@ #include "zlib.h" -#if defined(STDC) && !defined(Z_SOLO) +#if defined(STDC) # if !(defined(_WIN32_WCE) && defined(_MSC_VER)) # include # endif @@ -43,7 +43,7 @@ typedef unsigned short ush; typedef ush FAR ushf; typedef unsigned long ulg; -#if !defined(Z_U8) && !defined(Z_SOLO) && defined(STDC) +#if !defined(Z_U8) && defined(STDC) # include # if (ULONG_MAX == 0xffffffffffffffff) # define Z_U8 unsigned long @@ -92,18 +92,16 @@ extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */ #if defined(MSDOS) || (defined(WINDOWS) && !defined(WIN32)) # define OS_CODE 0x00 -# ifndef Z_SOLO -# if defined(__TURBOC__) || defined(__BORLANDC__) -# if (__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__)) - /* Allow compilation with ANSI keywords only enabled */ - void _Cdecl farfree( void *block ); - void *_Cdecl farmalloc( unsigned long nbytes ); -# else -# include -# endif -# else /* MSC or DJGPP */ -# include +# if defined(__TURBOC__) || defined(__BORLANDC__) +# if (__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__)) + /* Allow compilation with ANSI keywords only enabled */ + void _Cdecl farfree( void *block ); + void *_Cdecl farmalloc( unsigned long nbytes ); +# else +# include # endif +# else /* MSC or DJGPP */ +# include # endif #endif @@ -133,7 +131,7 @@ extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */ #ifdef OS2 # define OS_CODE 6 -# if defined(M_I86) && !defined(Z_SOLO) +# if defined(M_I86) # include # endif #endif @@ -188,7 +186,7 @@ extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */ /* functions */ -#if defined(pyr) || defined(Z_SOLO) +#if defined(pyr) # define NO_MEMCPY #endif #if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__) @@ -237,11 +235,9 @@ extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */ # define Tracecv(c,x) #endif -#ifndef Z_SOLO - voidpf ZLIB_INTERNAL zcalloc(voidpf opaque, unsigned items, - unsigned size); - void ZLIB_INTERNAL zcfree(voidpf opaque, voidpf ptr); -#endif +voidpf ZLIB_INTERNAL zcalloc(voidpf opaque, unsigned items, + unsigned size); +void ZLIB_INTERNAL zcfree(voidpf opaque, voidpf ptr); #define ZALLOC(strm, items, size) \ (*((strm)->zalloc))((strm)->opaque, (items), (size))